{
	"manufacturer": "Vision Security",
	"manufacturerId": "0x0109",
	"label": "ZL7434-5",
	"description": "In-Wall Switch",
	"devices": [
		{
			"productType": "0x200c",
			"productId": "0x0c06",
			"zwaveAllianceId": 1378
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZL 7434-5 to your controller. To get in the “inclusion” mode, the distance between module and controller is suggested to be in one meter. Press 3 times program switch within 2 seconds or turn on the wall switch 3 times within 2 seconds (or press toggle switch 3 times) to be included",
		"exclusion": "Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZL 7434-5 from your controller. \nPress 3 times program switch within 2 seconds or turn on the wall switch 3 times within 2 seconds (or press toggle switch 3 times) to be excluded.",
		"reset": "Power off first, press Program Switch and power on, ZL7434-5 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1378/Microsoft%20Word%20-%20ZL7434-5%20In-Wall%20Switch%20-%201%20Relay_20150520.pdf"
	}
}