{
	"manufacturer": "Jasco",
	"manufacturerId": "0x0063",
	"label": "32562 / ZW6301",
	"description": "Hinge PIN Door Sensor, 500S",
	"devices": [
		{
			"productType": "0x4953",
			"productId": "0x3031",
			"zwaveAllianceId": 1795
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "20",
			"$import": "templates/jasco_template.json#report_method"
		}
	],
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network.\n2. Once the controller is ready to include your Hinge Pin Smart Door Sensor press and release the manual/program button on the smart switch to include it in the network.",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to exclude your device, press and release the manual/program button on the Hinge Pin Smart Door Sensor to exclude it from the network.",
		"reset": "You may wish to reset all of your Hinge Pin Smart Door Sensor's settings to their factory defaults. To do this, press the program button 10 times within 6 seconds. If your Door Sensor has been successfully reset, its LED light will blink for 3 seconds. \n\nThis should only be used in the event your network’s primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1795/32562-1%20EnFrSp%20QSG%20-%20Combined.pdf"
	}
}