{
	"manufacturer": "Jasco",
	"manufacturerId": "0x0063",
	"label": "28170 / ZW3105",
	"description": "Plug-In 2-Outlet Dimmer, 1 Controlled, 500S",
	"devices": [
		{
			"productType": "0x5044",
			"productId": "0x3039",
			"zwaveAllianceId": [1268, 2106, 2172]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Local Load",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"$import": "~/templates/master_template.json#led_indicator_three_options"
		},
		{
			"#": "7",
			"$import": "templates/jasco_template.json#dimmer_steps_z"
		},
		{
			"#": "8",
			"$import": "templates/jasco_template.json#dimmer_times_z"
		},
		{
			"#": "9",
			"$import": "templates/jasco_template.json#dimmer_steps"
		},
		{
			"#": "10",
			"$import": "templates/jasco_template.json#dimmer_times"
		},
		{
			"#": "11",
			"$import": "templates/jasco_template.json#dimmer_steps_a"
		},
		{
			"#": "12",
			"$import": "templates/jasco_template.json#dimmer_times_a"
		}
	],
	"compat": {
		"mapBasicSet": "event"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",
		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network’s primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2172/Binder1.pdf"
	}
}