{ "manufacturer": "Jasco", "manufacturerId": "0x0063", "label": "14314 / ZW4002", "description": "In-Wall Fan Speed Control, 500S", "devices": [ { "productType": "0x4944", "productId": "0x3138", "zwaveAllianceId": [1369, 1937] } ], "firmwareVersion": { "min": "0.0", "max": "255.255" }, "associations": { "1": { "label": "Lifeline", "maxNodes": 5, "isLifeline": true }, "2": { "label": "Local Load", "maxNodes": 5 }, "3": { "label": "Double Tap", "maxNodes": 5, "isLifeline": true } }, "paramInformation": [ { "#": "3", "$import": "~/templates/master_template.json#led_indicator_three_options" } ], "compat": { "mapBasicSet": "event" }, "metadata": { "inclusion": "Linking your device\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press and release the top or\nbottom of the wireless smart switch(rocker) to include it in the network.\nNote: Your controller may need to be within 10 feet of the device to be included.\n3. Once your controller has confirmed that the device has been included, refresh the\nZ-wave network to optimize performance.\nPlease reference the controller’s manual for instructions", "exclusion": "Note: To exclude and reset the device, follow the instructions provided by your\nZ-Wave controller", "reset": "Quickly press ON (Top) button three (3) times and then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable", "manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1937/Binder1.pdf" } }