{
	"manufacturer": "Jasco",
	"manufacturerId": "0x0063",
	"label": "14311 / ZW4201",
	"description": "Plug-In Outdoor Switch, 500S",
	"devices": [
		{
			"productType": "0x4f50",
			"productId": "0x3033",
			"zwaveAllianceId": [1370, 1843, 2559]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Local Load",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"compat": {
		"mapBasicReport": false
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to\ninclude the smart switch to the Z-Wave network.\n2. Once the controller is ready to include your outdoor smart\nswitch, single press and release the manual/program\nbutton on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch\nhas been included, refresh the Z-Wave network to\noptimize performance",
		"exclusion": "1. Follow the instructions for your Z-wave certified controller to\nexclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and\nrelease the manual/program button on the smart switch to exclude\nit from the network",
		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug\nthe switch into a receptacle.\nNote: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1370/14311-1%20QSG.pdf"
	}
}