{
	"manufacturer": "Secure Meters (UK) Ltd.",
	"manufacturerId": "0x0059",
	"label": "SSP 301 ANZ",
	"description": "SSP",
	"devices": [
		{
			"productType": "0x000e",
			"productId": "0x0002",
			"zwaveAllianceId": 1246
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Delta Based Switch Status Reporting",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 1,
			"unsigned": true
		},
		{
			"#": "2",
			"label": "Time Interval Based Switch Status Reporting",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0
		},
		{
			"#": "3",
			"label": "Relay and LED Configuration",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"unsigned": true
		}
	],
	"metadata": {
		"inclusion": "To include the SSP 301 onto a network, put the controller into inclusion mode. Now press and hold the button on SSP 301 for 4 to 7 seconds then\nrelease. The network status LED will start flashing (twice per second) on successful start of inclusion process. On successful inclusion the LED will turn off.",
		"exclusion": "To exclude the SSP 301 from a network, put the controller into exclusion mode. Now press and hold the button on SSP 301 for 4 to 7 seconds then\nrelease. After successful exclusion the network status LED will start flashing once per second, and the device will reset to factory default.",
		"reset": "Please use this procedure only when the primary controller is missing or otherwise inoperable, Power cycle the device, press and hold the button\nfor 7-11 seconds within the 60 seconds of power cycle to put the device in factory default. It reset all configuration and association to factory default. It also removes the device from Z-Wave network",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1246/SSP%20301%20User%20Manual%20for%20Web.pdf"
	}
}