{
	"manufacturer": "Eaton",
	"manufacturerId": "0x001a",
	"label": "RF96APM",
	"description": "Plug-In Module - ON/OFF",
	"devices": [
		{
			"productType": "0x0053",
			"productId": "0x0050",
			"zwaveAllianceId": 3187
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "13",
			"label": "Remember the Last Status",
			"description": "1: remember (0: do not remember)",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Do not remember last status",
					"value": 0
				},
				{
					"label": "Remember last status",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "This ON/OFF plug supports Auto Inclusion feature where it will automatically enter Inclusion mode when first powered up after a factory reset.\n1. There is an ON/OFF button on the front of the device which is used to carry out inclusion, exclusion or association.\n2. Put your Z-Wave Controller into inclusion/exclusion mode.\n3. Plug this ON/OFF Plug-in module into a wall outlet near the load to be controlled.\n4. The Inclusion process should be completed when the LED stops blinking.\nNote: If Auto Inclusion fails, refer to the Troubleshooting section regarding Manual Inclusion\n\nIf auto inclusion fails:\n1. Put the Z-Wave Controller into Inclusion mode\n2. Press the ON/OFF button 3 times within\n1.5 seconds to put the unit into Inclusion mode",
		"exclusion": "1. Put the Z-Wave Controller into Exclusion mode\n2. Press the ON/OFF button 3 times within\n1.5 seconds to put the unit into Exclusion mode",
		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable\n1. Press the ON/OFF button 3 times within\n1.5 seconds to put the unit into exclusion mode\n2. Within 1 second of step 1, press and hold the\nbutton for 5 seconds\n3. Node ID is deleted. The device reverts to factory\ndefault state",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3187/EIS-0245-E%20(REV.%20B).pdf"
	}
}