{
	"manufacturer": "Danfoss",
	"manufacturerId": "0x0002",
	"label": "MT02650",
	"description": "Devolo Thermostat (09356)",
	"devices": [
		{
			"productType": "0x0005",
			"productId": "0x0175"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Target for Wakeup and Override Notifications",
			"maxNodes": 10,
			"isLifeline": true
		},
		"2": {
			"label": "Temperature sensor",
			"maxNodes": 1
		}
	},
	"compat": {
		// If we don't query specific things on wake up, this device will
		// think it is not connected and show error E5
		"queryOnWakeup": [
			// ["CommandClass", "API method", ...arguments]
			["Battery", "get"],
			["Thermostat Setpoint", "get", 1]
		]
	},
	"metadata": {
		"inclusion": "In order to include (add) a Z-Wave device to a network it must be in factory default state.\nClick on the middle button will confirm inclusion or exclusion and wakeup the device for wireless communication.\nA long push for 3 seconds on the middle buttons enters and leaves the management mode indicated by a 'M'.",
		"exclusion": "Click on the middle button will confirm inclusion or exclusion and wakeup the device for wireless communication.\nA long push for 3 seconds on the middle buttons enters and leaves the management mode indicated by a 'M'.",
		"reset": "Remove the batteries and keep the function button '*' pressed for 5 seconds after the batteries are inserted back.\nThis procedure should only be used when the primary controller is inoperable.",
		"manual": "http://manuals-backend.z-wave.info/make.php?lang=en&sku=DEVE9356&cert=ZC08-15020003"
	}
}