{
	"manufacturer": "Remotec",
	"manufacturerId": "0x5254",
	"label": "ZRP-200JP",
	"description": "Z-Wave Slim Repeater",
	"devices": [
		{
			"productType": "0x1009",
			"productId": "0x8180",
			"zwaveAllianceId": 2841
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1 Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode \n2 When it is prompted to enter it, please triple click the “PROG” button within 1 second. Blue Indicator flashes TWICE then stay off",
		"exclusion": "1 Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode \n2 When it is prompted to enter it, please triple click the “PROG” button within 1 second. Blue Indicator flashes TWICE then stay off",
		"reset": "Press and Hold “PROG” button for 3 seconds on Z-Wave Slim Repeater, the indicator will light up Purple Color. DO NOT Release the “PROG” Button until indicator change back to Blue color and flashes TWICE.\n\nRemark : All the Setting and Data will be permanently deleted.\n \n*Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2841/BW8180JP%20ZRP-200JP%20Installation%20Guide.pdf"
	}
}