{
	"manufacturer": "Remotec",
	"manufacturerId": "0x5254",
	"label": "ZRP-110",
	"description": "Z-Wave Repeater",
	"devices": [
		{
			"productType": "0x1000",
			"productId": "0x8141",
			"zwaveAllianceId": [2495, 3621]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "Include or Exclude the ZRP-120 from the existing Z-Wave Home Control Network with your primary controller.\n- Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n- When prompted by your primary controller, triple click the PROG button within 1 second.\n- The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.",
		"exclusion": "Include or Exclude the ZRP-120 from the existing Z-Wave Home Control Network with your primary controller.\n- Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n- When prompted by your primary controller, triple click the PROG button within 1 second.\n- The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.",
		"reset": "All Configuration Parameter values and Association information will be restored to factory default settings and excluded from the network.\nStep Setup Key LED Indication Status on ZRP-100\n1 Press and keep holding the PROG button for not less than 10 seconds. - LED state will toggle for first 5 seconds of being pressed.\n- LED state will toggle again after the remaining 5 seconds.\n2 Release the PROG button then triple click the PROG button within 2 seconds of step 1. - LED will stay in previous ON or OFF stage.\nRemark: All the setting and data will be permanently deleted. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3621/F-BW8141US-0001%20(ZRP-120NA)_User%20Manual_V0.1_20190826.pdf"
	}
}