{
	"manufacturer": "Cherubini S.p.A.",
	"manufacturerId": "0x0455",
	"label": "Ora ZRX",
	"description": "Z-Wave Tubular Motor",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x0001"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Follow Me",
			"maxNodes": 5
		},
		"3": {
			"label": "Scene Activation",
			"maxNodes": 5
		},
		"4": {
			"label": "Follow Me Weather",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "30",
			"label": "Send Scene ID: Jam When Opening",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 254,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "31",
			"label": "Send Scene ID: Jam When Closing",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 254,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "32",
			"label": "Parameter for Window Covering",
			"description": "Parameter ID used by the window covering set on group Follow Me Weather",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 23,
			"defaultValue": 13,
			"options": [
				{
					"label": "Outbound edge towards the left (Open/Close)",
					"value": 0
				},
				{
					"label": "Outbound edge towards the left (Position)",
					"value": 1
				},
				{
					"label": "Outbound edge towards the right (Open/Close)",
					"value": 2
				},
				{
					"label": "Outbound edge towards the right (Position)",
					"value": 3
				},
				{
					"label": "Inbound edge towards the left (Open/Close)",
					"value": 4
				},
				{
					"label": "Inbound edge towards the left (Position)",
					"value": 5
				},
				{
					"label": "Inbound edge towards the right (Open/Close)",
					"value": 6
				},
				{
					"label": "Inbound edge towards the right (Position)",
					"value": 7
				},
				{
					"label": "Both horizontal inbound edges (Open/Close)",
					"value": 8
				},
				{
					"label": "Both horizontal inbound edges (Position)",
					"value": 9
				},
				{
					"label": "Vertical slats angle (Open/Close)",
					"value": 10
				},
				{
					"label": "Vertical slats angle (Position)",
					"value": 11
				},
				{
					"label": "Outbound edge towards the bottom (Open/Close)",
					"value": 12
				},
				{
					"label": "Outbound edge towards the bottom (Position)",
					"value": 13
				},
				{
					"label": "Outbound edge towards the top (Open/Close)",
					"value": 14
				},
				{
					"label": "Outbound edge towards the top (Position)",
					"value": 15
				},
				{
					"label": "Inbound edge towards the bottom (Open/Close)",
					"value": 16
				},
				{
					"label": "Inbound edge towards the bottom (Position)",
					"value": 17
				},
				{
					"label": "Inbound edge towards the top (Open/Close)",
					"value": 18
				},
				{
					"label": "Inbound edge towards the top (Position)",
					"value": 19
				},
				{
					"label": "Both vertical inbound edges (Open/Close)",
					"value": 20
				},
				{
					"label": "Both vertical inbound edges (Position)",
					"value": 21
				},
				{
					"label": "Horizontal slats angle (Open/Close)",
					"value": 22
				},
				{
					"label": "Horizontal slats angle (Position)",
					"value": 23
				}
			]
		},
		{
			"#": "33",
			"label": "Last Movement Trigger",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 3,
			"defaultValue": 0,
			"readOnly": true,
			"options": [
				{
					"label": "Requested by user",
					"value": 0
				},
				{
					"label": "Wind",
					"value": 1
				},
				{
					"label": "Sun",
					"value": 2
				},
				{
					"label": "Rain",
					"value": 3
				}
			]
		},
		{
			"#": "34",
			"label": "Sun Activation",
			"valueSize": 1,
			"defaultValue": 5,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 5
				},
				{
					"label": "Enable",
					"value": 7
				}
			]
		},
		{
			"#": "35",
			"label": "Sensor Activation Status",
			"description": "Which sensor has been associated to the motor. The value is the sum of wind, sun and rain status.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 63,
			"defaultValue": 0,
			"readOnly": true
		},
		{
			"#": "36",
			"label": "Signal Connection Status",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 1,
			"defaultValue": 0,
			"readOnly": true,
			"options": [
				{
					"label": "Active",
					"value": 0
				},
				{
					"label": "Lost",
					"value": 1
				}
			]
		},
		{
			"#": "37",
			"label": "Level Reporting Frequency",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 2,
			"maxValue": 60,
			"defaultValue": 5
		},
		{
			"#": "38",
			"label": "Send Multilevel Report",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1) Prepare the Z-Wave controller for inclusion of a device (see your controller’s instructions).\n2) On the motor, run the programming sequence for inclusion:\na. By the remote control: AB - AC - AB (2 seconds), wait for confirmation movements.\nb. By the button (if the end stops are not adjusted, you can use either sequence indifferently):\ni. With the motor on the high limit switch: UP-UP-UP-UP-UP-DOWN.\nii. With the motor on the low limit switch: DOWN-DOWN-DOWN-DOWN-DOWN-UP.\n3) The motor performs a few short movements to signal that the inclusion procedure is in progress.\n4) Check the controller to verify that the procedure was successful.",
		"exclusion": "1) Prepare the Z-Wave controller for exclusion of a device (see your controller’s instructions).\n2) On the motor, run the programming sequence for exclusion:\na. By the remote control: AB - AC - AB (2 seconds), wait for confirmation movements.\nb. By the button (if the end stops are not adjusted, you can use either sequence indifferently):\ni. With the motor on the high limit switch: UP-UP-UP-UP-UP-DOWN.\nii. With the motor on the low limit switch: DOWN-DOWN-DOWN-DOWN-DOWN-UP.\n3) The motor performs a few short movements to signal that the exclusion procedure is in progress.\n4) Check the controller to verify that the procedure was successful.",
		"reset": "1) From the remote control: AB - AC - BC (4 seconds), wait for confirmation movements to be executed.\n2) From the button (if the end stops are not adjusted, you can use either sequence indifferently):\na. With the motor on the high limit switch: UP-UP-UP-DOWN-UP-DOWN.\nb. With the motor on the low limit switch: DOWN-DOWN-DOWN-UP-DOWN-UP.\nINFO: If the reset is performed while the device is still part of a network, it notifies the other devices in the lifeline group that it has been removed.",
		"manual": "https://www.cherubini-group.com/Content/uploads/2021/10/ORA_A4518_6N14_EN.pdf"
	}
}