{
	"manufacturer": "RATOC Systems Inc.",
	"manufacturerId": "0x040f",
	"label": "RS-ZWIREX1",
	"description": "Z-Wave Smart IR Repeater",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0001",
			"zwaveAllianceId": 3465
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "To add or include the RS-ZWIREX1 into a Z-Wave network using Z-wave Learn mode button\n1. Set the controller in inclusion mode\n2. Push the Learn mode button once\n3. Wait about 15 seconds",
		"exclusion": "To remove or exclude the RS-ZWIREX1 into a Z-Wave network \n1. Set the controller in exclusion mode \n2. Push Z-Wave Learn mode button once\n3. Wait about 5 seconds.",
		"reset": "The RS-ZWIREX1 can be set to factory settings by pushing Z-wave Learn mode button for 5 seconds. \nPlease use this procedure only when the primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3465/QuickGuide_ZWIREX1_0703.pdf"
	}
}