{
	"manufacturer": "ABUS Security-Center GmbH & Co. KG",
	"manufacturerId": "0x0403",
	"label": "SHSG10000",
	"description": "High-Volume Siren (95 dB) and LED Strobe Light",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0000",
			"zwaveAllianceId": 3053
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "A.) Plug the SHSG10000 into a socket\nB.) Set the Gateway/Controller into inclusion mode (Click the + (Add) button in your Z-Wave App and follow the further instructions)\nC.) Press the Network-button 3 times within 1.5 seconds and the Status-LED will flash 3 times\nD:) If the Add device process is successful, the Status-LED will turn off.\nE: Repeat the inclusion process from step B if it was not successful",
		"exclusion": "A.) Set the Gateway/Controller into exclusion mode (Click the - (Remove) button in your Z-Wave App and follow the further instructions)\nB.) Press the Network-button 3 times within 1.5 seconds and the Status-LED will flash 3 times If the Remove device process is successful, the Status-LED flash 6 times.\nC.) Repeat the inclusion process from step B if it was not successful",
		"reset": "Press the Network-button for 10 seconds to factory reset the device\n\nNote:\n1, This procedure should only be used if the primary gateway is not capable of acting.\n2, If the multi-sensor is set to the factory setting, the status is set to \"not included\", the association settings and possible configurations are reset to default",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3053/Manual%20SHSG10000%20EN.pdf"
	}
}