{
	"manufacturer": "AiBase Smart Technology",
	"manufacturerId": "0x0384",
	"label": "HA-ZW-5SAB",
	"description": "4-in-1 Motion Sensor",
	"devices": [
		{
			"productType": "0x0200",
			"productId": "0x0009",
			"zwaveAllianceId": 2943
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Group 2",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "10",
			"label": "Low Battery Power Level",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 10
		},
		{
			"#": "100",
			"label": "Set Reporting Intervals to Default",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "101",
			"label": "Temperature Reporting Interval",
			"valueSize": 4,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 7200,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				}
			]
		},
		{
			"#": "102",
			"label": "Humidity Reporting Interval",
			"valueSize": 4,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 7200,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				}
			]
		},
		{
			"#": "103",
			"label": "Luminance Reporting Interval",
			"valueSize": 4,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 7200,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				}
			]
		},
		{
			"#": "104",
			"label": "Battery Level Reporting Interval",
			"valueSize": 4,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 86400,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				}
			]
		},
		{
			"#": "110",
			"label": "Status Change (Temperature/Humidity/Luminance/Battery) Reporting",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				}
			]
		},
		{
			"#": "111",
			"label": "Temperature Change Threshold",
			"valueSize": 2,
			"unit": "0.1 °C",
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 10
		},
		{
			"#": "112",
			"label": "Humidity Change Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 5,
			"defaultValue": 5
		},
		{
			"#": "113",
			"label": "Luminance Change Threshold",
			"valueSize": 2,
			"unit": "lux",
			"minValue": 1,
			"maxValue": 65528,
			"defaultValue": 150,
			"unsigned": true
		},
		{
			"#": "114",
			"label": "Battery Level Change Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 10
		},
		{
			"#": "12",
			"label": "Motion Sensor Sensitivity",
			"description": "1 = lowest sensitivity, 10 = highest sensitivity",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 10,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "13",
			"label": "Motion Re-Trigger Wait Time",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 5,
			"maxValue": 15300,
			"defaultValue": 30
		},
		{
			"#": "14",
			"label": "Send Basic Set On Motion",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				}
			]
		},
		{
			"#": "15",
			"label": "Motion: Basic Set Value",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "0xff on triggered, 0x00 on cleared",
					"value": 0
				},
				{
					"label": "0x00 on triggered, 0xff on cleared",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Add 4-in-1 Motion Sensor into a Z-Wave network: \na. Let the primary controller go into inclusion mode (If you don’t know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will blink, If the inclusion is successful, then LED will keep on 2 seconds. Otherwise, the LED will blink until timeout, in which case you need to repeat the process from step b.",
		"exclusion": "Remove 4-in-1 Motion Sensor from a Z-Wave network: \na. Let the primary controller go into exclusion mode (If you don’t know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will keep on, If the remove is successful, then LED will blink 2 seconds. Otherwise, the LED will keep on until timeout, in which case you need to repeat the process from step b.\n\nNote: 4-in-1 Motion Sensor will go away “Z-Wave SmartStart” Inclusion when it is removed from a Z-Wave network.",
		"reset": "Reset 4-in-1 Motion Sensor to factory Default:\n1. Press and hold the Z-Button for 5 seconds.\n2. If holding time is more than 5 seconds, the LED will blink fast at acceleration. If reset success 4-in-1 Motion Sensor LED will turn off. When the Z-Button is released, it will send “Device Reset Locally Command”. Otherwise please repeat step 2.\n\nNote:\n1, This procedure should only be used when the primary controller is inoperable.\n2, Reset 4-in-1 Motion Sensor to factory default settings. It will set the 4-in-1 Motion Sensor to not in Z-Wave network state; delete the Association setting and restore the Configuration setting to the default.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2943/AIBASE%20Z-Wave%20Multi-Sensor%20UserGuide%2020180606.pdf"
	}
}