{
	"manufacturer": "Raylios",
	"manufacturerId": "0x0370",
	"label": "ZD2102-5",
	"description": "Door Sensor",
	"devices": [
		{
			"productType": "0x2001",
			"productId": "0x0106",
			"zwaveAllianceId": 2797
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "~/templates/master_template.json#base_enable_disable_255",
			"label": "External Switch"
		}
	],
	"metadata": {
		"inclusion": "For “Inclusion” (adding to) a network: Put the Z-Wave™ network controller into “inclusion” mode following its instructions. To add the ZD2102-5 to your controller press the program switch of ZD2102-5 to send the Node Information Frame (NIF). After sending NIF, the network controller will send the auto inclusion request; otherwise, ZD2102-5 will go to sleep after 15 seconds",
		"exclusion": "For “Exclusion” (removing from) a network: Put the Z-Wave™ network controller into “exclusion” mode, following its instructions. To delete the ZD2102-5 from your controller press the program switch of ZD2102-5 for at least 1 second to be excluded. Note: All user and network settings will be cleared and the device reset to factory setting defaults when the device is excluded",
		"reset": "Factory Default Reset: Trigger the rear cover switch to send the Alarm Report and trigger the reed switch (close & open) 5 times in 10 seconds, ZD2102-5 will send the “Device Reset Locally Notification” command and reset to the factory default condition",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2797/ZD%202102-5_R4_20170913%20(RED).pdf"
	}
}