{
	"manufacturer": "LG U+",
	"manufacturerId": "0x0357",
	"label": "UPowerSwitch",
	"description": "2-Button Smart Switch",
	"devices": [
		{
			"productType": "0x0058",
			"productId": "0x0002",
			"zwaveAllianceId": 3683
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Temperature & Humidity Reporting Interval",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 3600,
			"defaultValue": 600,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "2",
			"label": "Temperature Change Report Threshold",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": 10,
			"maxValue": 30,
			"defaultValue": 20
		},
		{
			"#": "3",
			"label": "Humidity Change Report Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 5,
			"maxValue": 20,
			"defaultValue": 10
		}
	],
	"metadata": {
		"inclusion": "Press the 3rd button for above 5 seconds. Then, red color LED blinks every 0.5 second 6 times. At this time released the button during the red color LED blinking. Then, ZWAVE Add / Remove operation is started",
		"exclusion": "Press the 3rd button for above 5 seconds. Then, red color LED blinks every 0.5 second 6 times. At this time released the button during the red color LED blinking. Then, ZWAVE Add / Remove operation is started",
		"reset": "Hold the low button for 10 seconds.\n-Keep holding the button, then at 5 second,red LED of 3rd button is blinking 6 times, and keep holding.\nThe red LED blinking 6 times after 10 seconds. When you release your hand, the LED will stop blinking and return to the factory settings.\n*NOTES: Use this procedure only when the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3660/SmartSwitch_Product_Manual_KO.pdf"
	}
}