{
	"manufacturer": "HELTUN",
	"manufacturerId": "0x0344",
	"label": "HE-HLS01",
	"description": "High Load Switch",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x000a"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "templates/heltun_template.json#frequency_region"
		},
		{
			"#": "3",
			"$import": "templates/heltun_template.json#hw_sw_ver"
		},
		{
			"#": "4",
			"$import": "templates/heltun_template.json#energy_consumption"
		},
		{
			"#": "7",
			"$import": "templates/heltun_template.json#relay_output_mode",
			"label": "Relay Output Mode"
		},
		{
			"#": "10",
			"$import": "~/templates/master_template.json#base_1-100_nounit",
			"label": "Floor Temperature Sensor Resistance",
			"unit": "kΩ",
			"defaultValue": 10
		},
		{
			"#": "16",
			"$import": "~/templates/master_template.json#temperature_scale"
		},
		{
			"#": "17",
			"$import": "templates/heltun_template.json#temp_sensor_calibration"
		},
		{
			"#": "19",
			"$import": "templates/heltun_template.json#controller_time_correction"
		},
		{
			"#": "21",
			"$import": "templates/heltun_template.json#weekday_override"
		},
		{
			"#": "22",
			"$import": "templates/heltun_template.json#time_override"
		},
		{
			"#": "23",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Auto On/Off"
		},
		{
			"#": "24",
			"label": "Auto Off Timeout",
			"valueSize": 1,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 120,
			"defaultValue": 5
		},
		{
			"#": "25",
			"label": "Auto On Reconnect Timeout",
			"description": "When the load is reconnected the relay output will be switched on after this time.",
			"valueSize": 1,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 120,
			"defaultValue": 0
		},
		{
			"#": "26",
			"label": "High Load Timeout Protection: Power Threshold",
			"valueSize": 2,
			"unit": "W",
			"minValue": 100,
			"maxValue": 3500,
			"defaultValue": 0
		},
		{
			"#": "27",
			"label": "High Load Timeout Protection: Time Threshold",
			"valueSize": 2,
			"unit": "minutes",
			"minValue": 1,
			"maxValue": 1440,
			"defaultValue": 0
		},
		{
			"#": "41",
			"$import": "templates/heltun_template.json#external_input_hold_control_mode",
			"label": "External Input: Hold Control Mode"
		},
		{
			"#": "46",
			"$if": "firmwareVersion >= 1.3",
			"$import": "templates/heltun_template.json#hold_duration",
			"label": "External Input: Hold Mode Duration"
		},
		{
			"#": "51",
			"$import": "templates/heltun_template.json#external_input_click_control_mode",
			"label": "External Input: Click Control Mode"
		},
		{
			"#": "66",
			"$if": "firmwareVersion >= 1.5",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev",
			"defaultValue": 0
		},
		{
			"#": "71",
			"label": "Relay Timer Mode Duration",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 43200,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "141",
			"$import": "templates/heltun_template.json#report_interval",
			"label": "Energy Consumption Report Interval"
		},
		{
			"#": "142",
			"label": "Energy Consumption Report Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 25
		},
		{
			"#": "143",
			"$import": "templates/heltun_template.json#report_interval",
			"label": "Temperature Report Interval"
		},
		{
			"#": "144",
			"$import": "~/templates/master_template.json#base_0-100_nounit",
			"label": "Temperature Report Threshold",
			"unit": "0.1 °C",
			"defaultValue": 2
		},
		{
			"#": "151",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Device Failure Notifications",
			"defaultValue": 1
		},
		{
			"#": "152",
			"label": "Temperature Rise Notification",
			"description": "The value should be lower than the value of parameter 153 (Overheat Protection & Notification).",
			"valueSize": 2,
			"unit": "°C",
			"minValue": 1,
			"maxValue": 120,
			"defaultValue": 1
		},
		{
			"#": "153",
			"label": "Overheat Protection & Notification",
			"valueSize": 2,
			"unit": "°C",
			"minValue": 0,
			"maxValue": 120,
			"defaultValue": 0
		},
		{
			"#": "154",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Over-Current Notification",
			"description": "The device will switch Off the load when the current reaches 16A.",
			"defaultValue": 1
		},
		{
			"#": "155",
			"label": "Over-Load Protection & Notification",
			"valueSize": 2,
			"unit": "W",
			"minValue": 0,
			"maxValue": 4000,
			"defaultValue": 3500
		},
		{
			"#": "156",
			"$if": "firmwareVersion >= 1.5",
			"label": "Over-Voltage Protection & Notification",
			"valueSize": 2,
			"unit": "V",
			"minValue": 0,
			"maxValue": 280,
			"defaultValue": 260
		},
		{
			"#": "157",
			"$if": "firmwareVersion >= 1.5",
			"label": "Voltage Drop Protection & Notification",
			"valueSize": 2,
			"unit": "V",
			"minValue": 0,
			"maxValue": 240,
			"defaultValue": 90
		},
		{
			"#": "156",
			"$if": "firmwareVersion < 1.5",
			"label": "Over-Voltage Protection & Notification",
			"valueSize": 2,
			"unit": "V",
			"minValue": 0,
			"maxValue": 280,
			"defaultValue": 240
		},
		{
			"#": "157",
			"$if": "firmwareVersion < 1.5",
			"label": "Voltage Drop Protection & Notification",
			"valueSize": 2,
			"unit": "V",
			"minValue": 0,
			"maxValue": 240,
			"defaultValue": 200
		},
		{
			"#": "158",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Sparks Protection & Notification",
			"defaultValue": 1
		},
		{
			"#": "159",
			"$if": "firmwareVersion >= 1.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Load On Notification"
		},
		{
			"#": "160",
			"$if": "firmwareVersion >= 1.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Load Off Notification"
		}
	]
}