{
	"manufacturer": "KDDI",
	"manufacturerId": "0x0337",
	"label": "H03HG8",
	"description": "BL1000HW",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0005",
			"zwaveAllianceId": [2779, 3213]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"reset": "1. Unplug this product and wait for approximately 10 seconds.\n\n2. Hold down the reset button (It is placed at the bottom of the back side) and keep holding it .\n\n3.Plug in this product.(Keep holding the reset button.)\n\nAbout 20 seconds after , All front lumps blink 3 times at the same time , After that you may release your hands from the reset button.\n\n ※Don't unplug this product until completely initialized, as it may be the cause of breakdown.\n\n\"If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\"",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3213/user_manual_r1.pdf"
	}
}