{
	"manufacturer": "LG Innotek",
	"manufacturerId": "0x0273",
	"label": "OSLI-01",
	"description": "Open Sensor",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0001",
			"zwaveAllianceId": [1751, 1943, 2339, 2397]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Battery Report Period",
			"description": "The period is set in 15 minute increments (multiply the value by 15)",
			"valueSize": 1,
			"unit": "minutes",
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 24,
			"unsigned": true
		}
	],
	"metadata": {
		"inclusion": "1. Press & hold inclusion/exclusion button for 5 seconds until LED turns on.\n2. Open sensor will try inclusion for 30 seconds when button is released.",
		"exclusion": "1. Press & hold inclusion/exclusion button for 5 seconds until LED turns on.\n2. Open sensor will try exclusion when button is released.\n3. If exclusion is successful, LED will blink 3 times with 250ms interval.",
		"reset": "1. Press & hold inclusion/exclusion button for 10 seconds.\n2. LED will blink while holding the button.\n3. Factory reset will be done in 10 seconds after releasing button and blink 5 times with 100ms interval.\n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1751/OSLI-01_Guide_document_Rev1.31.pdf"
	}
}