{
	"manufacturer": "zConnect",
	"manufacturerId": "0x024e",
	"label": "DHS-WIN-GDC-02",
	"description": "Garage Door Opener",
	"devices": [
		{
			"productType": "0x0021",
			"productId": "0x0014"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"endpoints": {
		"0": {
			"associations": {
				"1": {
					"label": "Lifeline",
					"maxNodes": 3,
					"isLifeline": true
				},
				"2": {
					"label": "Sensor 1",
					"maxNodes": 10
				},
				"3": {
					"label": "Sensor 2",
					"maxNodes": 10
				},
				"4": {
					"label": "Sensor 3",
					"maxNodes": 10
				},
				"5": {
					"label": "Sensor 4 (optional temp sensor)",
					"maxNodes": 10
				}
			}
		},
		"1": {
			"associations": {
				"1": {
					"$import": "#endpoints/0/associations/1",
					"isLifeline": false
				},
				"2": {
					"$import": "#endpoints/0/associations/2"
				}
			}
		},
		"2": {
			"associations": {
				"1": {
					"$import": "#endpoints/0/associations/1",
					"isLifeline": false
				},
				"2": {
					"$import": "#endpoints/0/associations/3"
				}
			}
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "templates/zconnect_template.json#relay_mode_selection",
			"label": "Relay 1 Mode"
		},
		{
			"#": "2",
			"$import": "templates/zconnect_template.json#interval_1-65000",
			"label": "Strobe Closed Interval",
			"description": "Relay 1 and 2 closed contacts time interval in strobe mode.",
			"defaultValue": 10
		},
		{
			"#": "3",
			"$import": "templates/zconnect_template.json#interval_1-65000",
			"label": "Strobe Open Interval",
			"description": "Relay 1 and 2 open contacts time interval in strobe mode.",
			"defaultValue": 10
		},
		{
			"#": "4",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 1 Auto Off Delay",
			"description": "Relay will turn off automatically after time specified in this parameter. After receiving command On Relay 1 will be switched Off automatically with predefined delay."
		},
		{
			"#": "5",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 1 On Delay",
			"description": "Relay 1 will be switched On with predefined delay."
		},
		{
			"#": "6",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 1 Off Delay",
			"description": "Relay 1 will be switched Off with predefined delay."
		},
		{
			"#": "7",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_off",
			"label": "Relay 1 Restore After Power Loss",
			"description": "Restore to the last known state for relay 1 after power was interrupted."
		},
		{
			"#": "8",
			"label": "Reaction to Broadcast Commands",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 3,
			"defaultValue": 0,
			"options": [
				{
					"label": "Accept broadcast on and off",
					"value": 0
				},
				{
					"label": "Ignore broadcast on and off",
					"value": 1
				},
				{
					"label": "Ignore broadcast on, accept off",
					"value": 2
				},
				{
					"label": "Accept broadcast on, ignore off",
					"value": 3
				}
			]
		},
		{
			"#": "9",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Hide Relay",
			"description": "Hide relay 2 in controller interface"
		},
		{
			"#": "10",
			"$import": "templates/zconnect_template.json#relay_mode_selection",
			"label": "Relay 2 Mode"
		},
		{
			"#": "11",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 2 Auto Off Delay",
			"description": "Relay will turn off automatically after time specified in this parameter. After receiving command On Relay 2 will be switched Off automatically with predefined delay."
		},
		{
			"#": "12",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 2 On Delay",
			"description": "Relay 2 will be switched On with predefined delay."
		},
		{
			"#": "13",
			"$import": "templates/zconnect_template.json#interval_1-65000_disable",
			"label": "Relay 2 Off Delay",
			"description": "Relay 2 will be switched Off with predefined delay."
		},
		{
			"#": "14",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_off",
			"label": "Relay 2 Restore After Power Loss",
			"description": "Restore to the last known state for relay 2 after power was interrupted."
		},
		{
			"#": "15",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Relay 1 & 2 Together",
			"description": "When enabled, Relay 2 will be switched On when Relay 1 is switched."
		},
		{
			"#": "16",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Relay 1 with S1"
		},
		{
			"#": "20",
			"$import": "templates/zconnect_template.json#sensor_relay_control",
			"label": "Relay 1 and Connected Sensor Integration"
		},
		{
			"#": "21",
			"$import": "templates/zconnect_template.json#sensor_relay_control",
			"label": "Relay 2 and Connected Sensor Integration"
		},
		{
			"#": "24",
			"$import": "templates/zconnect_template.json#sensor_processing_options",
			"label": "Sensor 1 Processing Options",
			"description": "Values of sensor 1 options for processing. Devices included in association group 2 will be using this parameter for controlling sensor 1."
		},
		{
			"#": "26",
			"$import": "templates/zconnect_template.json#interval_1-600_disable",
			"label": "Sensor 1 Send Interval",
			"description": "Time interval to submit Sensor 1 readings to controller.",
			"defaultValue": 300
		},
		{
			"#": "29",
			"$import": "templates/zconnect_template.json#sensor_processing_options",
			"label": "Sensor 2 Processing Options",
			"description": "Values of sensor 2 options for processing. Devices included in association group 3 will be using this parameter for controlling sensor 2."
		},
		{
			"#": "31",
			"$import": "templates/zconnect_template.json#interval_1-600_disable",
			"label": "Sensor 2 Send Interval",
			"description": "Time interval to submit Sensor 2 readings to controller.",
			"defaultValue": 300
		},
		{
			"#": "32",
			"$import": "templates/zconnect_template.json#base_-60-1000",
			"label": "Sensor 3 On Level",
			"description": "Multilevel sensor 3 values for turning devices On in association group 4 or device itself. Note: Value selection depends on sensor type and its readings.",
			"defaultValue": 0
		},
		{
			"#": "33",
			"$import": "templates/zconnect_template.json#base_-60-1000",
			"label": "Sensor 3 Off Level",
			"description": "Multilevel sensor 3 values for turning devices Off in association group 4 or device itself. Note: Value selection depends on sensor type and its readings.",
			"defaultValue": 0
		},
		{
			"#": "34",
			"$import": "templates/zconnect_template.json#sensor_processing_options",
			"label": "Sensor 3 Processing Options",
			"description": "Values of sensor 3 options for processing. Devices included in association group 4 will be using this parameter for controlling sensor 3."
		},
		{
			"#": "35",
			"$import": "~/templates/master_template.json#base_1-100_nounit",
			// I suspect the documentation is incorrect regarding this parameter
			// as it doesn't make sense as documented. (same as 36).
			// I think this is about sensor value change.
			"label": "Sensor 3 Level Change",
			"description": "Level change to trigger sending sensor change to controller. Default values depends on connected sensor type: temperature =1; humidity=5; luminosity=100 lux; power=50 Watt.",
			"defaultValue": 1
		},
		{
			"#": "36",
			"$import": "templates/zconnect_template.json#interval_1-600_disable",
			"label": "Sensor 3 Send Interval",
			"description": "Time interval to submit Sensor 3 readings to association group 1.",
			"defaultValue": 300
		},
		{
			"#": "37",
			"$import": "templates/zconnect_template.json#base_-60-1000",
			"label": "Sensor 4 On Value",
			"description": "Multilevel sensor 4 values for turning devices On in association group 5 or device itself. Note: Value selection depends on sensor type and its readings.",
			"defaultValue": 0
		},
		{
			"#": "38",
			"$import": "templates/zconnect_template.json#base_-60-1000",
			"label": "Sensor 4 Off Value",
			"description": "Multilevel sensor 4 values for turning devices Off in association group 5 or device itself. Note: Value selection depends on sensor type and its readings.",
			"defaultValue": 0
		},
		{
			"#": "39",
			"$import": "templates/zconnect_template.json#sensor_processing_options",
			"label": "Sensor 4 Processing Options",
			"description": "Values of sensor 4 options for processing. Devices included in association group 5 will be using this parameter for controlling sensor 4."
		},
		{
			"#": "40",
			"$import": "~/templates/master_template.json#base_1-100_nounit",
			// I suspect the documentation is incorrect regarding this parameter
			// as it doesn't make sense as documented. (same as 41).
			// I think this is about sensor value change.
			"label": "Sensor 4 Value Change",
			"description": "Value change interval to trigger sensor change to controller. Default values depends on connected sensor type: temperature =1; humidity=5; luminosity=100 lux; power=50 Watt.",
			"defaultValue": 1
		},
		{
			"#": "41",
			"$import": "templates/zconnect_template.json#interval_1-600_disable",
			"label": "Sensor 4 Send Interval",
			"description": "Time interval to submit Sensor 4 readings to association group 1.",
			"defaultValue": 300
		},
		{
			"#": "50",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Require Secure Commands",
			"description": "React only to secure commands when device is in secure mode.",
			"defaultValue": 0
		},
		{
			"#": "51",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Secure Send Group 2",
			"description": "Send secure command signals for association group 2.",
			"defaultValue": 0
		},
		{
			"#": "52",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Secure Send Group 3",
			"description": "Send secure command signals for association group 3.",
			"defaultValue": 0
		},
		{
			"#": "53",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Secure Send Group 4",
			"description": "Send secure command signals for association group 4.",
			"defaultValue": 0
		},
		{
			"#": "54",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Secure Send Group 5",
			"description": "Send secure command signals for association group 5.",
			"defaultValue": 0
		}
	],
	"metadata": {
		"inclusion": "Put the controller into inclusion mode, with security if supported. Connect power to the Z-Wave garage door controller. If already powered click inclusion/exclusion button on garage door controller three times.",
		"exclusion": "Put the controller into exclusion mode, Click the inclusion/exclusion button three times.",
		"reset": "The device is factory reset on exclusion from the network.",
		"manual": "https://www.digitalhomesystems.com.au/documentation/ZWaveGarageDoorControllerManual.pdf"
	}
}