{ "manufacturer": "WeBeHome", "manufacturerId": "0x0249", "label": "PSR07", "description": "Smart Color Button", "devices": [ { "productType": "0x0002", "productId": "0x0001", "zwaveAllianceId": [2029, 2049] } ], "firmwareVersion": { "min": "0.0", "max": "255.255" }, "paramInformation": [ { "#": "1", "label": "Basic Set Off Level", "valueSize": 1, "minValue": 0, "maxValue": 99, "defaultValue": 0 }, { "#": "2", "label": "Basic Set On Level", "valueSize": 1, "minValue": 0, "maxValue": 99, "defaultValue": 99 }, { "#": "10", "label": "Auto Report Battery Time", "valueSize": 1, "unit": "0.5 hours", "minValue": 1, "maxValue": 127, "defaultValue": 12 }, { "#": "25", "label": "Dimmer Set Method", "valueSize": 1, "defaultValue": 0, "allowManualEntry": false, "options": [ { "label": "Auto send command Basic Set after rotating", "value": 0 }, { "label": "Send command Basic Set by touching key after rotating", "value": 1 } ] } ], "metadata": { "inclusion": "1. Have Z-Wave™ Controller entered inclusion mode.\n2. Rotate to area A and then press button three times within 1.5 seconds to enter the inclusion mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave™ Controller about 20 seconds", "exclusion": "1. Have Z-Wave™ Controller entered exclusion mode.\n2. Rotate to area A and then press button three times within 1.5 seconds to enter the exclusion mode. Node ID has been removed", "reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Rotate to area A and then press button four times within 1.5 seconds and do not release the button in the 4 th pressed, and the red LED will light ON.\n2. After the red LED goes out, release the button within 2 seconds.\n3. IDs are removed and all settings will reset to factory default", "manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2029/Webehome_UserManual.pdf" } }