{
	"manufacturer": "SafeTech Products",
	"manufacturerId": "0x023c",
	"label": "QLDLZW",
	"description": "Doorlock",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0002",
			"zwaveAllianceId": 1451
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Group 1",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"metadata": {
		"inclusion": "Prepare your Z-Wave controller to add a device to the network (refer to your controller's user manual.) Push the Z-Wave button on The Doorlock. The button is accessed through a small hole, insert a paperclip or similar to push it. (See diagram in Product Manual for button placement.)",
		"exclusion": "Prepare your Z-Wave controller to remove a device from the network (refer to your controller's user manual)\nPush the Z-Wave button on The Doorlock. (See diagram in Product Manual for button placement.)",
		"reset": "To reset The Doorlock's Z-Wave settings to their factory defaults, hold the Z-Wave button down for 5 seconds. (See diagram in Product Manual for button placement.) The reset procedure should only be used when the primary controller is missing or inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1451/R003023_02-Doorlock%20Operating%20Instructions.pdf"
	}
}