{
	"manufacturer": "LG U+",
	"manufacturerId": "0x022c",
	"label": "OSR-01",
	"description": "Open Sensor",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0001",
			"zwaveAllianceId": [1382, 1608]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Battery Report Period",
			"valueSize": 1,
			"unit": "15 minutes",
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 24,
			"unsigned": true
		}
	],
	"metadata": {
		"inclusion": "a. Press & hold Inclusion/Exclusion button for 5 seconds when Open Sensor is exclusion status.\nb. LED of Open sensor will be on 5 seconds later.\nc. Open sensor will try Inclusion for 30sec when button is released.\nd. LED will blink 3 times if Inclusion is successful.",
		"exclusion": "a. Receiver will stay exclusion waiting mode.\nb. Press & hold Inclusion/Exclusion button for 5 seconds when Open Sensor is Inclusion status.\nc. LED of Open sensor will be on 5 seconds later.\nd. Open sensor will try Exclusion when button is released. LED will blink 3 times if Exclusion is successful.",
		"reset": "a. Press & hold Inclusion/Exclusion button for 10sec.\nb. LED will blink while holding the button.\nc. Factory reset will be done in 5sec after releasing button and LED will blink 5 times.  Please use this procedure only when the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1382/Open_Sensor_Manual.docx"
	}
}