{
	"manufacturer": "Shenzhen Kaadas Intelligent Technology Co., Ltd.",
	"manufacturerId": "0x021d",
	"label": "DB1",
	"description": "Digital Deadbolt Lock",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0002",
			"zwaveAllianceId": 3373
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "-Follow the user guide of hub to enter inclusion mode.\n-Operate on lock following guide below:\n1.Enter master mode(refer to programming instruction)\n2.Input “8” to enter “function extension settings”\n3.Input “1” to join a network",
		"exclusion": "-Follow the user guide of hub to enter exclusion mode.\n-Operate on lock following guide below:\n1.Enter master mode(refer to programming instruction)\n2.Input “8” to enter “function extension settings”\n3.Input “2” to log off a network",
		"reset": "※Please use this procedure only when the network primary controller is missing or inoperable.\n-Operations on lock\n1.Open the door and keep the lock in \"unlock\" status\n2.Open battery box and find the reset button. \n3.Use a sharp thing to press and hold the reset button.\n4.Keep holding the reset button and remove a battery from battery box then replace it.\n5.Keep holding the reset button until hearing voice guide",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3373/Alfred%20Z-Wave%20Plus%20System%20Integrators%20Guide(DB1)%20V1.2.pdf"
	},
	"compat": {
		"commandClasses": {
			"remove": {
				// The device has a bug where it stays awake after receiving a Supervision Get command
				// with "request updates" set to true, which quickly drains the battery.
				"Supervision": {
					"endpoints": "*"
				}
			}
		}
	}
}