{
	"manufacturer": "HANK Electronics Ltd.",
	"manufacturerId": "0x0208",
	"label": "HKZW-SO03",
	"description": "Smart Plug",
	"devices": [
		{
			"productType": "0x0101",
			"productId": "0x000a",
			"zwaveAllianceId": 1854
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Group 1",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "20",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Overload Protection",
			"description": "Triggered when the current exceeds 16.5A for more than 5 seconds",
			"defaultValue": 1
		},
		{
			"#": "21",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
		},
		{
			"#": "24",
			"label": "Notification When Load Status Change",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				},
				{
					"label": "Only for manual changes",
					"value": 2
				}
			]
		},
		{
			"#": "27",
			"label": "LED Power Indication",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Always on",
					"value": 0
				},
				{
					"label": "5 seconds after switching",
					"value": 1
				}
			]
		},
		{
			"#": "151",
			"label": "Power Change Report Threshold",
			"valueSize": 2,
			"unit": "W",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 50,
			"unsigned": true,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "152",
			"label": "Power Change Report Threshold Percentage",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 10,
			"unsigned": true,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "171",
			"label": "Power Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 30,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "172",
			"label": "Energy Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 300,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "173",
			"label": "Voltage Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "174",
			"label": "Current Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1) Connect the power supply.\n2) Set the Z-Wave network main controller into inclusion mode (see Z-Wave network controller operating manual).\n3) Triple click the Z-button or power up the device , RGB LED indicator should blink fast in blue.\n4) Smart Plug should be recognized and included into the Z-Wave network.",
		"exclusion": "1) Insert the Plug into a socket.\n2) Set the Z-Wave network controller into the exclusion mode (see Z-Wave controller operating manual).\n3) Triple click the Z button.\n4) RGB LED indicator will blink orange till the removing process is completed, than the indicator will keep orange for 3 seconds.",
		"reset": "1) Insert the Plug into a socket,\n2) Press and hold the Z button for more than 20 seconds,\n3) If holding time more than 20seconds, the RGB LED indicator will keep yellow for 2 seconds, which means resetting is complete. \n Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1854/HKZW-SO03_manual.pdf"
	}
}