{
	"manufacturer": "Heatit",
	"manufacturerId": "0x019b",
	"label": "TF016 / TF021",
	"description": "Z-Wave Thermostat",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0001",
			// One of these is labeled TF016, the other TF021
			"zwaveAllianceId": [1182, 1234]
		},
		{
			"productType": "0x0003",
			"productId": "0x0201"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 8,
			"isLifeline": true
		},
		"2": {
			"label": "On/Off control",
			"maxNodes": 8
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Operation Mode",
			"valueSize": 2,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Off",
					"value": 0
				},
				{
					"label": "Heat",
					"value": 1
				},
				{
					"label": "Cool",
					"value": 2
				},
				{
					"label": "Energy save heat",
					"value": 11
				}
			]
		},
		{
			"#": "2",
			"$if": "firmwareVersion >= 1.8",
			"label": "Sensor Mode",
			"valueSize": 2,
			"defaultValue": 1,
			"allowManualEntry": false,
			/* eslint-disable @zwave-js/consistent-config-string-case */
			"options": [
				{
					"label": "F",
					"value": 0
				},
				{
					"label": "A",
					"value": 1
				},
				{
					"label": "AF",
					"value": 2
				},
				{
					"label": "A2-mode",
					"value": 3
				},
				{
					"label": "P",
					"value": 4
				},
				{
					"label": "FP",
					"value": 5
				}
			]
			/* eslint-enable @zwave-js/consistent-config-string-case */
		},
		{
			"#": "3",
			"$if": "firmwareVersion >= 1.8",
			"label": "Floor Sensor Type",
			"valueSize": 2,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "10k NTC",
					"value": 0
				},
				{
					"label": "12k NTC",
					"value": 1
				},
				{
					"label": "15k NTC",
					"value": 2
				},
				{
					"label": "22k NTC",
					"value": 3
				},
				{
					"label": "33k NTC",
					"value": 4
				},
				{
					"label": "47k NTC",
					"value": 5
				}
			]
		},
		{
			"#": "4",
			"$if": "firmwareVersion >= 1.8",
			"label": "DIFF L. Temperature Control Hysteresis",
			"description": "Range 3-30 (0.3 °C 3.0 °C)",
			"valueSize": 2,
			"minValue": 3,
			"maxValue": 30,
			"defaultValue": 5
		},
		{
			"#": "5",
			"$if": "firmwareVersion >= 1.8",
			"label": "FLo, Floor Min Limit",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 50
		},
		{
			"#": "6",
			"$if": "firmwareVersion >= 1.8",
			"label": "FHi, Floor Max Limit",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 400
		},
		{
			"#": "7",
			"$if": "firmwareVersion >= 1.8",
			"label": "ALo, Air Min Limit",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 50
		},
		{
			"#": "8",
			"$if": "firmwareVersion >= 1.8",
			"label": "AHi, Air Max Limit",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 400
		},
		{
			"#": "9",
			"$if": "firmwareVersion >= 1.8",
			"label": "PLo, FP-Mode P Setting",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 9,
			"defaultValue": 0
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 1.8",
			"label": "CO Mode Setpoint",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 210
		},
		{
			"#": "11",
			"$if": "firmwareVersion >= 1.8",
			"label": "ECO Mode Setpoint",
			"description": "Range 50-400 (5.0 °C 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 180
		},
		{
			"#": "12",
			"$if": "firmwareVersion >= 1.8",
			"label": "P Setting",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 2
		},
		{
			"#": "13",
			"$if": "firmwareVersion >= 1.8",
			"label": "COOL Setpoint",
			"description": "Only if cooling enabled. Range 50-400 (5.0 °C - 40.0 °C)",
			"valueSize": 2,
			"minValue": 50,
			"maxValue": 400,
			"defaultValue": 210
		},
		{
			"#": "17",
			"$if": "firmwareVersion >= 1.92",
			"label": "Temperature Report Interval",
			"valueSize": 2,
			"unit": "10 seconds",
			"minValue": 0,
			"maxValue": 8640,
			"defaultValue": 6,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "18",
			"$if": "firmwareVersion >= 1.92",
			"label": "Temperature Report Change Threshold",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 10
		}
	],
	"compat": {
		// The device reports its relay state via the Basic CC
		"mapBasicReport": false,
		// Supervision reports are sent from the root device instead of endpoints
		"commandClasses": {
			"remove": {
				"Supervision": {
					"endpoints": "*"
				}
			}
		}
	},
	"metadata": {
		"inclusion": "To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds.\nThe display will show OFF. Press Right (down) 4 times till you see Con in the display.\nNow start adding the device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately 2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion fails, Err (error) will appear.\nLeave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings",
		"exclusion": "To exclude the thermostat from your home automation gateway, press Center (confirm) for 10 seconds.\nThe display will show OFF. Press Right (down) 4 times till you see Con in the display.\nNow start removing the device in your home automation software. Enter exclusion mode by pressing Center (confirm) for approximately 2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If exclusion fails, Err (error) will appear.\nLeave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings",
		"reset": "By pressing buttons Left and Center (up and confirm) for 20 seconds, the thermostat will perform a complete factory reset.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1234/Manual_Multireg%20Z-Wave_Ver2015-A.pdf"
	}
}