{
	"manufacturer": "Heatit",
	"manufacturerId": "0x019b",
	"label": "Z-RELAY",
	"description": "Multipurpose Relay",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0208"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Status LED",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED turned off",
					"value": 0
				},
				{
					"label": "LED turned on",
					"value": 1
				},
				{
					"label": "LED flashing at 1 second intervals",
					"value": 2
				},
				{
					"label": "LED flashing at ½ second interval",
					"value": 3
				}
			]
		},
		{
			"#": "2",
			"label": "LED Brightness",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 50
		},
		{
			"#": "3",
			"label": "Thermistor Type Input 1",
			"description": "This parameter decides which kind of thermistor is connected to input 1.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No thermistor, input is disabled",
					"value": 0
				},
				{
					"label": "10K NTC",
					"value": 1
				}
			]
		},
		{
			"#": "4",
			"label": "Thermistor Type Input 2",
			"description": "This parameter decides which kind of thermistor is connected to input 2.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No thermistor, input is disabled",
					"value": 0
				},
				{
					"label": "10K NTC",
					"value": 1
				}
			]
		},
		{
			"#": "5",
			"label": "Input 1 Calibration",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": -40,
			"maxValue": 40,
			"defaultValue": 0
		},
		{
			"#": "6",
			"label": "Input 2 Calibration",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": -40,
			"maxValue": 40,
			"defaultValue": 0
		},
		{
			"#": "7",
			"label": "Input 1 Report Interval",
			"valueSize": 2,
			"unit": "10 seconds",
			"minValue": 0,
			"maxValue": 8640,
			"defaultValue": 6
		},
		{
			"#": "8",
			"label": "Input 2 Report Interval",
			"valueSize": 2,
			"unit": "10 seconds",
			"minValue": 0,
			"maxValue": 8640,
			"defaultValue": 6
		},
		{
			"#": "9",
			"label": "Flood Sensor Report Interval",
			"valueSize": 2,
			"unit": "10 seconds",
			"minValue": 0,
			"maxValue": 8640,
			"defaultValue": 2
		},
		{
			"#": "10",
			"label": "Meter Reports Interval",
			"valueSize": 2,
			"unit": "10 seconds",
			"minValue": 0,
			"maxValue": 8640,
			"defaultValue": 90
		},
		{
			"#": "11",
			"label": "Input 3 Flood Steady Timer",
			"description": "Defines the time after which the flood sensor state will be considered valid",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 60,
			"defaultValue": 6
		},
		{
			"#": "12",
			"label": "Auto Relay On",
			"description": "Configures which events will cause the relay to be turned on",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Not automatically turned on",
					"value": 0
				},
				{
					"label": "Flood detected",
					"value": 1
				},
				{
					"label": "No flood detected",
					"value": 2
				}
			]
		},
		{
			"#": "13",
			"label": "Auto Relay Off",
			"description": "Configures which events will cause the relay to be turned off",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Not automatically turned off",
					"value": 0
				},
				{
					"label": "Flood detected",
					"value": 1
				},
				{
					"label": "No flood detected",
					"value": 2
				}
			]
		},
		{
			"#": "14",
			"label": "Flood Detection Threshold",
			"description": "Configures the threshold for input 3 that will cause a flood to be detected.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 4095,
			"defaultValue": 2048
		},
		{
			"#": "15",
			"label": "Voltage",
			"description": "Voltage value used for power calculation.",
			"valueSize": 1,
			"unit": "V",
			"minValue": 0,
			"maxValue": 250,
			"defaultValue": 220,
			"unsigned": true
		},
		{
			"#": "17",
			"label": "Digital Value Per Ampere",
			"description": "Note: Heatit recommends not changing this value unless instructed to do so",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 81,
			"unsigned": true
		},
		{
			"#": "18",
			"label": "Load Size Connect to Relay Output",
			"description": "Actual load in Watt.",
			"valueSize": 2,
			"unit": "W",
			"minValue": 0,
			"maxValue": 6000,
			"defaultValue": 0
		}
	],
	"compat": {
		"commandClasses": {
			"remove": {
				// The device does not support Supervision correctly
				"Supervision": {
					"endpoints": "*"
				}
			}
		}
	}
}