{
	"manufacturer": "Heatit",
	"manufacturerId": "0x019b",
	"label": "Z-Repeater",
	"description": "Z-Wave Range Extender",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x3600",
			"zwaveAllianceId": 3818
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Connect the Router into the power socket to power on. \n2. Put the Z-Wave Gateway or Control Panel into Inclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n3. Within 1.5 seconds, press the Function Button 3 times.\n4. Refer to the operation manual of the Z-Wave Gateway or Control Panel to complete the adding process.\n5. If the sensor has already been added (included) into another Z-Wave Gateway/Control Panel, or if the sensor is unable to be added into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel.",
		"exclusion": "1. Put the Z-Wave Gateway or Control Panel into Exclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n2. Within 1.5 seconds, press the Function Button 3 times and the Router will be removed from the Z-Wave network.",
		"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n*. Press and hold the Function Button for 10 seconds to factory reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3818/Heatit%20Z-Repeater_20200305.pdf"
	}
}