{
	"manufacturer": "Sensative AB",
	"manufacturerId": "0x019a",
	"label": "11-01-011",
	"description": "Strips-MaZw",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0003"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Notification Type",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Binary Sensor Report",
					"value": 0
				},
				{
					"label": "Notification Report",
					"value": 1
				},
				{
					"label": "Basic Report",
					"value": 2
				}
			]
		},
		{
			"#": "2",
			"label": "LED Indication",
			"description": "Specify if LED should indicate special event.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Off",
					"value": 0
				},
				{
					"label": "On",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Set your controller in include mode. Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds. A long LED blink indicates that the inclusion was successful.",
		"exclusion": "Set your controller in exclude mode. Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds. A long LED blink indicates that the exclusion was successful.",
		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
		"reset": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, but on the 3rd repetition, leave the magnet at the rounded edge for 10 seconds. A long LED signal indicates success.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=Manuals/3388/Strips%20Guard%20EU%20R3.pdf"
	}
}