{
	"manufacturer": "Climax Technology, Ltd.",
	"manufacturerId": "0x018e",
	"label": "PSM-DIN2-ZW",
	"description": "DIN Rail Power Switch Meter",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x0003",
			"zwaveAllianceId": 3824
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Connect the external power supply to the input connector and external devices to the output connector.\n2. Put the Z-Wave Gateway or Control Panel into Inclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n3. Within 1.5 seconds, press the Function Button 3 times.\n4. Refer to the operation manual of the Z-Wave Gateway or Control panel to complete the adding process.\n5. If the device has already been added (included) into another Z-Wave Gateway/Control Panel, or if the device is unable to be added into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel.",
		"exclusion": "1. Put the Z-Wave Gateway or Control Panel into Exclusion mode (please refer to the Z-Wave Gateway or Control panel manual).\n2. Within 1.5 seconds, press the Function Button 3 times and the device will be removed from the Z-Wave network.",
		"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n#. Press and hold the Function Button of the device for 10 seconds to factory reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3824/PSM-DIN2-ZW_%20S2_SmartStart_20200320.pdf"
	}
}