{
	"manufacturer": "Climax Technology, Ltd.",
	"manufacturerId": "0x018e",
	"label": "EMD-1ZW",
	"description": "Energy Meter",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x000c",
			"zwaveAllianceId": 2251
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufactures and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.\n -Insert batteries to power on the E-meter.\n -Put the Z-Wave control panel into Inclusion mode (please refer to \n the Z-Wave control panel manual).\n -Within 1.5 seconds, press the Function Button 3 times.\n -Refer to operation manual of the Z-Wave Gateway or Control Panel \n to complete the adding process.\nIf the device has already been added (included) into another Z-Wave Gateway/Control Panel, or if the device is unable to be added into the current Z-Wave Gateway/Control Panel, try removing it first (see Removing Device).",
		"exclusion": "The device must be removed from existing Z-Wave network before being added into another.\nExclusion Mode\n -Put the Z-Wave Gateway or Control Panel into Exclusion mode \n (please refer to the Z-Wave or control panel manual).\n -Within 1.5 seconds, press the Function Button 3 times and the \n device will be removed from the Z-Wave network.",
		"reset": "Factory resetting the device will restore it to factory default settings (i.e. not included into any Z-Wave network). Please only use this procedure if the Z-Wave Gateway or Control Panel is lost or otherwise inoperable.\n -Press and hold the Function Button of the device for 10 seconds to \n factory reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2251/EMD-1ZW%2020170218.pdf"
	}
}