{
	"manufacturer": "Nexia Home Intelligence",
	"manufacturerId": "0x0178",
	"label": "9125051",
	"description": "VeriLock Translator",
	"devices": [
		{
			"productType": "0x5a44",
			"productId": "0x414e",
			"zwaveAllianceId": 1173
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Buzzer Volume",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 100
		},
		{
			"#": "2",
			"label": "Discovery Mode",
			"description": "Start, stop, or get the results of discovery mode. Retrieve the configuration parameter to obtain the results.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				},
				{
					"label": "Timeout (Readonly)",
					"value": 2
				},
				{
					"label": "Failure (Readonly)",
					"value": 3
				}
			]
		},
		{
			"#": "3",
			"label": "Sleep Mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Off",
					"value": 0
				},
				{
					"label": "On",
					"value": 1
				}
			]
		}
	],
	"metadata": {
		"inclusion": "If not included to a Z-Wave network, the device will attempt to be added to the network at power-up following an LED start-up sequence. The controller must be put into include mode before plugging in the device.\n\nDuring normal operation, after putting the controller into include mode, a single press of the round Z-Wave button will add the device to the Z-Wave network.",
		"exclusion": "After putting the controller in exclude mode, a single press of the round Z-Wave button will remove the device from the Z-Wave network",
		"reset": "The device is factory reset by pressing and holding both the round (Z-Wave) and square (Multi-Purpose) buttons simultaneously for 15 seconds. Please use this procedure only in emergencies such as when the network primary controller is missing or otherwise inoperable. This should always be used as a last resort",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1173/18-HD75D1-1-EN.pdf"
	}
}