{
	"manufacturer": "Devolo",
	"manufacturerId": "0x0175",
	"label": "MT02646",
	"description": "Home Control Metering Plug",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0011",
			"zwaveAllianceId": 1129
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Watt Meter Report Period",
			"description": "multiples of 5s",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 720,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "2",
			"label": "KWH Meter Report Period",
			"description": "number of 10 minute intervals",
			"valueSize": 2,
			"unit": "10 minutes",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 6,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "3",
			"label": "Threshold of Current for Load Caution",
			"valueSize": 2,
			"unit": "0.01 A",
			"minValue": 10,
			"maxValue": 1300,
			"defaultValue": 1300
		},
		{
			"#": "4",
			"label": "Threshold of kWh for Load Caution",
			"description": "load caution threshold",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 10000,
			"defaultValue": 10000
		},
		{
			"#": "5",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
		},
		{
			"#": "6",
			"label": "Mode of Switch Off Function",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Switch off commands received are ignored",
					"value": 0
				},
				{
					"label": "Switch off commands received are honored",
					"value": 1
				}
			]
		},
		{
			"#": "7",
			"label": "LED Indication Mode",
			"description": "Restore switch state mode.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "The LED follows the state of the switch",
					"value": 1
				},
				{
					"label": "LED off with load on",
					"value": 2
				},
				{
					"label": "Flash mode",
					"value": 3
				}
			]
		},
		{
			"#": "8",
			"label": "Auto Off Timer",
			"description": "Auto off timer. 0 will disable the auto off function.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "9",
			"label": "RF Off Command Mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Switch all off turns switch off",
					"value": 0
				},
				{
					"label": "Ignore all off",
					"value": 1
				},
				{
					"label": "If all off is received, turn on if it is off",
					"value": 2
				},
				{
					"label": "Switch all off turns switch on",
					"value": 3
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing On/Off button three times within 2 seconds will enter inclusion \n mode on the switch.",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing On/Off button three times within 2 seconds will enter exclusion \n mode on the switch.",
		"reset": "(Use this procedure only in the event that the primary controller is lost or otherwise inoperable.)\n\n1. Pressing On/Off button three times within 2 seconds will enter inclusion mode on the switch.\n2. Within 1 second, press On/Off button again for 5 seconds.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1129/PAN11-1B%20manual-20140816.pdf"
	}
}