{
	"manufacturer": "Willis Electric Co., Ltd.",
	"manufacturerId": "0x015d",
	"label": "ZW1105",
	"description": "Shock Sensor",
	"devices": [
		{
			"productType": "0x2003",
			"productId": "0xb51c",
			"zwaveAllianceId": 2014
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple click the Tamper switch to include it in the network.",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple click the Tamper switch to exclude it from the network.",
		"reset": "Press and hold Tamper switch for at least 3 seconds while you insert the batteries.\n\nUse this procedure only in the event that the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2014/ZW1105-Manual0929.pdf"
	}
}