{
	"manufacturer": "EcoNet Controls",
	"manufacturerId": "0x0157",
	"label": "EVC200",
	"description": "Z-Wave Motor for Water/gas Ball Valves",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0002",
			"zwaveAllianceId": 2179
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "Press Button on the Valve-Control-Box three times rapidly (three times within 1.5 seconds). The red LED light will start blinking immediately (1 blink per second)",
		"exclusion": "Press Button on the Valve-Control-Box three times rapidly (three times within 1.5 seconds). The red LED light will start blinking immediately (1 blink per second)",
		"reset": "Press and hold the Button for 10 seconds to perform Local Reset procedure. Please use this procedure only when the network primary controller is missing or otherwise inoperable.”",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2179/EVC200%20User's%20Guide-v3.pdf"
	}
}