{
	"manufacturer": "Popp & Co",
	"manufacturerId": "0x0154",
	"label": "POPE700982",
	"description": "POPP Door / Window Sensor",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x0007"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Sensor Operation Mode",
			"description": "Iinternal magnet sensor or the external terminal",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Internal magnet sensor used",
					"value": 0
				},
				{
					"label": "External terminal inputs used",
					"value": 1
				}
			]
		},
		{
			"#": "2",
			"label": "Sensor State Polarity",
			"description": "This parameter defines the polarity of the magnet sensor",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Closed when magnet in proximity",
					"value": 0
				},
				{
					"label": "Opened when magnet in proximity",
					"value": 1
				}
			]
		},
		{
			"#": "3",
			"label": "Visual LED Indications",
			"description": "This parameter defines when the red LED will indicate events",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 7,
			"defaultValue": 7,
			"options": [
				{
					"label": "No indications",
					"value": 0
				},
				{
					"label": "Open/Close status change",
					"value": 1
				},
				{
					"label": "Wake up",
					"value": 2
				},
				{
					"label": "Device tampering",
					"value": 4
				}
			]
		},
		{
			"#": "4",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Range Test After Double Click",
			"description": "Allows to enable the activation of a Z-Wave range test"
		},
		{
			"#": "5",
			"label": "2nd Association Group Trigger",
			"description": "Status of the magnet switch that causes sending command",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Switch after open and close",
					"value": 0
				},
				{
					"label": "Switch after open",
					"value": 1
				},
				{
					"label": "Switch after close",
					"value": 2
				}
			]
		},
		{
			"#": "6",
			"label": "Command Sent to Devices of Association Group 2",
			"description": "which commands is sent to 2nd Association Group",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "On",
					"value": 0
				},
				{
					"label": "Off",
					"value": 1
				},
				{
					"label": "On and off",
					"value": 2
				}
			]
		},
		{
			"#": "7",
			"label": "Value Sent to 2nd Association Group on On Event",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 255,
			"unsigned": true,
			"writeOnly": true
		},
		{
			"#": "8",
			"label": "Value Sent to 2nd Association Group on Off Event",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "9",
			"label": "Time Delay of On Command Frame",
			"description": "sent after a delay",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "10",
			"label": "Time Delay of Off Command Frame",
			"description": "sent after a delay",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "11",
			"label": "Delay of Tamper Alarm Cancellation",
			"description": "Time a tamper alarm is delayed in seconds",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "12",
			"label": "Reporting Tamper Alarm Cancellation",
			"description": "This parameter defines if the alarm cancellation event is reported",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Do not send report",
					"value": 0
				},
				{
					"label": "Send report",
					"value": 1
				}
			]
		},
		{
			"#": "13",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Central Scene Event Functionality"
		},
		{
			"#": "14",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Tilt Sensor Functionality",
			"description": "enables/disables the tilt function",
			"defaultValue": 1
		}
	]
}