{
	"manufacturer": "Popp & Co",
	"manufacturerId": "0x0154",
	"label": "POPE700342",
	"description": "10-Years Smoke Detector without Siren",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x000d"
		},
		{
			"productType": "0x0004",
			"productId": "0x0010"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 10,
			"isLifeline": true
		},
		"2": {
			"label": "Switching Command",
			"maxNodes": 10,
			"description": "All devices in this group will receive a BASIC SET command on Smoke Alarms. Configuration parameter 3 and 4 will define the BASIC command sent."
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "Value of On-Command",
			"description": "This value is sent as BASIC Set to Association Group 2 when an Smoke Alarm occurs.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 99,
			"defaultValue": 99
		},
		{
			"#": "4",
			"label": "Value of Off-Command",
			"description": "This value is sent as BASIC Set to Association Group 2 when an Smoke Alarm is cleared.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 99,
			"defaultValue": 0
		}
	],
	"metadata": {
		"wakeup": "A double click on the Z-Wave button wakes up the device.",
		"inclusion": "Secure Inclusion: Push the button for 3 seconds, Unsecure Inclusion: Push the button for 1 seconds",
		"exclusion": "Push the button for 1 second",
		"reset": "To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5 seconds there is a short beep signaling the successful reset back to factory defaults.",
		"manual": "https://manuals.zwave.eu/backend/make.php?lang=en&sku=pope700342&type=popp"
	}
}