{
	"manufacturer": "UFairy G.R. Tech",
	"manufacturerId": "0x0152",
	"label": "DMWV1",
	"description": "Water Main Shut-Off",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0512",
			"zwaveAllianceId": [2647, 2648]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. For proper inclusion, bring the Water Main Shut-Off to the final location where it will be used. * \n2. Follow the instructions for your Z-Wave controller to enter inclusion mode. \n3 Make sure the Water Main Shut-Off is powered on, and when prompted by your controller, press the “open/close” button quickly 3 times in a row. The LED will stop blinking and stay on continuously upon successful inclusion. \n*For non Z-Wave Plus networks, please consult the owner’s manual for your primary controller to determine the best method and location for adding the Water Main Shut-Off to your Z-Wave network",
		"exclusion": "1. Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. \n2. When prompted, press the “open/close” button on the Shut-Off quickly 3 times in a row.",
		"reset": "Press and hold the open/close button for at least 10 seconds then release. The Shut-Off’s memory will be erased to factory settings. A flashing light indicates a successful factory reset. Beware that resetting your device will disconnect it from your system. Only do this if the controller is missing or otherwise unreachable!",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2648/Dome%20Water%20Main%20Shut-Off%20Advanced%20Manual.pdf"
	}
}