{
	"manufacturer": "Nortek Security & Control LLC",
	"manufacturerId": "0x014f",
	"label": "GD00Z-6 / GD00Z-7 / GD00Z-8",
	"description": "Z-Wave Garage Door Controller",
	"devices": [
		{
			"productType": "0x4744",
			"productId": "0x3531",
			"zwaveAllianceId": [2635, 2904, 3685, 3710]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Place your Z-Wave Controller into Discovery or Include mode.\n\n2. Press and release the link button\non the GD00Z-8.-GC\n\n3. Confirm that the GD00Z-8-GC was recognized by your Z-Wave Controller",
		"exclusion": "1. Place your Z-Wave Controller into Exclude mode.\n\n2. Press and release the link button\non the GD00Z-8.-GC\n\n3. Confirm that the GD00Z-8-GC was excluded by your Z-Wave Controller",
		"reset": "Reset the GD00Z-8-ADT by pressing the LINK button 5 times. A quick beep followed by a longer beep will indicate the reset.\nReset should only be used in the case of a missing or inoperative primary controller",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3710/10025383%20Rev-B%20-%20GD00Z-8%20GC_WEB.pdf"
	}
}