{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PSR03-C",
	"description": "Panic Button",
	"devices": [
		{
			"productType": "0x0008",
			"productId": "0x0027",
			"zwaveAllianceId": 1407
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 4,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "10",
			"$import": "templates/philio_template.json#battery_report_interval_30m"
		}
	],
	"metadata": {
		"inclusion": "1. Have Z-Wave™ Controller entered add mode.\n2. Press the key three times within 1.5 seconds to enter the add mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds",
		"exclusion": "1. Have Z-Wave ™ Controller entered remove mode.\n2. Press the key three times within 1.5 seconds to enter the \nremove mode.\nNode ID has been excluded",
		"reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Press the key three times,and do not release the key in the 4 th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are remove and all settings will reset to factory \ndefault",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
	}
}