{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PAN34",
	"description": "In Wall Roller Shutter Controller",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0080",
			"zwaveAllianceId": [4250, 4267, 4269, 4270, 4274, 4275, 4283, 4284, 4290, 4291]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Power Reporting Interval",
			"valueSize": 2,
			"unit": "5 seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 720,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "2",
			"label": "External Switch Mode",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "One button",
					"value": 1
				},
				{
					"label": "Two buttons",
					"value": 2
				}
			]
		},
		{
			"#": "3",
			"label": "Curtain Moving Time",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 6000,
			"defaultValue": 0,
			"options": [
				{
					"label": "Per calibration",
					"value": 0
				}
			]
		},
		{
			"#": "4",
			"label": "Power Threshold for Motor Movement",
			"valueSize": 1,
			"unit": "W",
			"minValue": 1,
			"maxValue": 5,
			"defaultValue": 1
		},
		{
			"#": "5",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Send Meter Reports",
			"description": "Triggered by a greater than 5% power variation",
			"defaultValue": 1
		},
		{
			"#": "6",
			"label": "Timer Offset for Motor Start",
			"valueSize": 2,
			"unit": ".01 seconds",
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 50
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter exclusion mode. \n3. Node ID has been excluded",
		"reset": "1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode. \n2. Within 1 second, press On/Off button again for 5 seconds. \n3. IDs are excluded",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4250/PAN34%20manual-20210713.pdf"
	}
}