{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PAN30",
	"description": "In-Wall Dual Relay Switch Module",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0077",
			"zwaveAllianceId": [4188, 4194, 4207, 4210, 4213, 4214, 4215, 4251, 4252, 4259]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Switch EP 1",
			"maxNodes": 5
		},
		"3": {
			"label": "Switch EP 2",
			"maxNodes": 5
		},
		"4": {
			"label": "Meter EP 3",
			"maxNodes": 5
		},
		"5": {
			"label": "Meter EP 4",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Power Reporting Interval",
			"valueSize": 2,
			"unit": "5 seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 720,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "2",
			"label": "kWh Reporting Interval",
			"valueSize": 2,
			"unit": "10 minutes",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 6,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "3",
			"label": "Power Reporting Threshold: Limit",
			"valueSize": 2,
			"unit": ".01 A",
			"minValue": 10,
			"maxValue": 750,
			"defaultValue": 750
		},
		{
			"#": "7",
			"label": "Power Reporting Threshold: Change",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 4,
			"defaultValue": 1,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "5%",
					"value": 1
				},
				{
					"label": "10%",
					"value": 2
				},
				{
					"label": "15%",
					"value": 3
				},
				{
					"label": "20%",
					"value": 4
				}
			]
		},
		{
			"#": "4",
			"label": "kWh Reporting Threshold: Limit",
			"valueSize": 2,
			"unit": "kWh",
			"minValue": 1,
			"maxValue": 10000,
			"defaultValue": 10000
		},
		{
			"#": "5",
			"label": "External Switch Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Edge mode",
					"value": 1
				},
				{
					"label": "Pulse mode",
					"value": 2
				},
				{
					"label": "Edge-Toggle mode",
					"value": 3
				}
			]
		},
		{
			"#": "6",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter exclusion mode.\n3. Node ID has been excluded",
		"reset": "1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode.\n2. Within 1 second, press On/Off button again for 5 seconds.\n3. IDs are excluded",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4188/PAN30%20manual-20210602.pdf"
	}
}