{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PAN04",
	"description": "In Wall Dual Relay Switch Module 2x1.5kW with Power Meter",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0003"
		},
		{
			"productType": "0x0001",
			"productId": "0x0012"
		},
		{
			"productType": "0x0001",
			"productId": "0x0014"
		},
		{
			"productType": "0x0001",
			"productId": "0x0061"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Meter Report Period (W)",
			"valueSize": 2,
			"unit": "5 seconds",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 720,
			"unsigned": true
		},
		{
			"#": "2",
			"label": "kWh Meter Report Period (kWh)",
			"valueSize": 2,
			"unit": "10 minutes",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 6,
			"unsigned": true
		},
		{
			"#": "3",
			"label": "Selected Relay",
			"description": "Which relay is addressed by the BASIC command class",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Relay 1",
					"value": 1
				},
				{
					"label": "Relay 2",
					"value": 2
				},
				{
					"label": "Relay 1 + 2",
					"value": 3
				}
			]
		},
		{
			"#": "4",
			"label": "External Switch Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Edge mode",
					"value": 1
				},
				{
					"label": "Pulse mode",
					"value": 2
				},
				{
					"label": "Edge-Toggle mode",
					"value": 3
				}
			]
		},
		{
			"#": "5",
			"label": "Threshold for Load Caution (A)",
			"description": "When this threshold is surpassed, a Meter Report will be sent.",
			"valueSize": 2,
			"unit": "0.01 A",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 750,
			"unsigned": true
		},
		{
			"#": "6",
			"label": "Threshold for Load Caution (kWh)",
			"description": "When this threshold is surpassed, a Meter Report will be sent.",
			"valueSize": 2,
			"unit": "kWh",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 10000,
			"unsigned": true
		},
		{
			"#": "7",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
		},
		{
			"#": "8",
			"label": "Auto Off Timer",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "9",
			"label": "RF Off Command Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Switch off",
					"value": 0
				},
				{
					"label": "Ignore",
					"value": 1
				},
				{
					"label": "Switch toggle",
					"value": 2
				},
				{
					"label": "Switch on",
					"value": 3
				}
			]
		},
		{
			"#": "10",
			"label": "Endpoint 3",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Exists",
					"value": 1
				},
				{
					"label": "Doesn't exist",
					"value": 2
				}
			]
		},
		{
			"#": "14",
			"label": "Differential Report Threshold (W)",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "5 %",
					"value": 1
				},
				{
					"label": "10 %",
					"value": 2
				},
				{
					"label": "15 %",
					"value": 3
				},
				{
					"label": "20 %",
					"value": 4
				}
			]
		},
		{
			"#": "31",
			"label": "Send Reports From Endpoints",
			"description": "Enable this to distinguish between the relays.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 1
				},
				{
					"label": "Enable",
					"value": 2
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter exclusion mode.",
		"reset": "1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode.\n2. Within 1 second, press On/Off button again for 5 seconds.\nUse this procedure only in the event that the primary controller is lost or otherwise inoperable.",
		"manual": "https://www.zwavetaiwan.com.tw/s/PAN04-manual-20181015-1.pdf"
	}
}