{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PAD15",
	"description": "2 Wire Dimmer",
	"devices": [
		{
			"productType": "0x0005",
			"productId": "0x007e",
			"zwaveAllianceId": [4209, 4216, 4217, 4248, 4256, 4257, 4261, 4264, 4268]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Switch Set",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Enable S1",
					"value": 0
				},
				{
					"label": "Enable S1 & S2",
					"value": 1
				},
				{
					"label": "Dimmer up/down",
					"value": 2
				}
			]
		},
		{
			"#": "2",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
		},
		{
			"#": "3",
			"label": "Send Multilevel Switch Reports",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				}
			]
		},
		{
			"#": "4",
			"label": "Maximum Level",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 99,
			"defaultValue": 99
		},
		{
			"#": "5",
			"label": "Minimum Level",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 98,
			"defaultValue": 0
		},
		{
			"#": "6",
			"label": "Basic Duration Set",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 2
		}
	],
	"metadata": {
		"inclusion": "Add(Classic Inclusion) : 1. Put your Z-Wave™ controller into inclusion mode by following the instructions\nprovided by the controller manufacturer. 2. Press the include button three times within 3 seconds to enter\ninclusion mode",
		"exclusion": "Remove (Exclusion) 1. Put your Z-Wave™ controller into exclusion mode by following the instructions\nprovided by the controller manufacturer. 2. Press the include button three times within 3 seconds to enter\nexclusion mode. 3. Node ID will be excluded",
		"reset": "Reset : 1. Press the include button four times within 3 seconds and hold on the button press without\nreleasing. 2. Keep pressing the button for 3 seconds then LED will be o ,release the button within 2 seconds.\n3. Device has been reset. ※Function Reset : Please use this procedure only when the network primary\ncontroller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4209/PAD15_UserManual_V3.pdf"
	}
}