{
	"manufacturer": "Philio Technology Corp",
	"manufacturerId": "0x013c",
	"label": "PAC01",
	"description": "Z-Wave JEM-A Adapter",
	"devices": [
		{
			"productType": "0x000b",
			"productId": "0x0058",
			"zwaveAllianceId": 3619
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the\ncontroller manufacturer.\n2. Pressing Include button of PAC01 three times within 2 seconds will enter inclusion mode.",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the\ncontroller manufacturer.\n2. Pressing Include button of PAC01 three times within 2 seconds will enter exclusion mode. \n3. Node ID has been excluded",
		"reset": "1. Pressing Include button of PAC01 three times within 2 seconds will enter inclusion mode. \n2. Within 1 second, press Include button of PAC01 again for 5 seconds. \n3. IDs are excluded",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3619/PAC01_UserManual.pdf"
	}
}