{
	"manufacturer": "Safe Grow",
	"manufacturerId": "0x013c",
	"label": "NSG-AB-02",
	"description": "Smart Outlet Plug",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x002f"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "5",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
		},
		{
			"#": "6",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Allow Turning Off",
			"description": "When disabled, the device will not turn off in response to Z-Wave commands or physical interaction.",
			"defaultValue": 1,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Enable",
					"value": 1
				}
			]
		},
		{
			"#": "7",
			"label": "LED Indicator Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when switch is on",
					"value": 1
				},
				{
					"label": "LED on when switch is off",
					"value": 2
				}
			]
		},
		{
			"#": "8",
			"label": "Auto Off Timer",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "9",
			"label": "Response to Z-Wave Off Command",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Turn off",
					"value": 0
				},
				{
					"label": "Ignore",
					"value": 1
				},
				{
					"label": "Toggle",
					"value": 2
				},
				{
					"label": "Turn on",
					"value": 3
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing On/Off button three times within 2 seconds will enter inclusion mode.",
		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer. \n 2. Pressing On/Off button three times within 2 seconds will enter exclusion mode. \n3. Node ID has been excluded",
		"reset": "Use this procedure only in the event that the primary controller is lost or otherwise inoperable. \n1. Pressing On/Off button three times within 2 seconds will enter inclusion mode. \n2. Within 1 second, press On/Off button again for 5 seconds. \n3. IDs are excluded"
	}
}