{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGWP102",
	"description": "Metered Wall Plug Switch",
	"devices": [
		{
			"productType": "0x0602",
			"productId": "0x1001"
		},
		{
			"productType": "0x0602",
			"productId": "0x1003"
		},
		{
			"productType": "0x0602",
			"productId": "0x1004"
		},
		{
			"productType": "0x0602",
			"productId": "0x4001"
		},
		{
			"productType": "0x0602",
			"productId": "0x4003"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "“Always On” Mode",
			"description": "Will turn on connected device permanently",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Function inactive",
					"value": 0
				},
				{
					"label": "Function activated",
					"value": 1
				}
			]
		},
		{
			"#": "2",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev"
		},
		{
			"#": "3",
			"$if": "firmwareVersion >= 3.2",
			"label": "Overload Safety Switch",
			"description": "allows to turn off the controlled device in case of exceeding the defined power.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 30000,
			"defaultValue": 0,
			"options": [
				{
					"label": "Function inactive",
					"value": 0
				}
			]
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 3.2",
			"label": "High Priority Power Report",
			"description": "minimum percentage change in active power",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 80
		},
		{
			"#": "11",
			"$if": "firmwareVersion >= 3.2",
			"label": "Standard Power Report",
			"description": "minimum percentage change in active power",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 15
		},
		{
			"#": "12",
			"$if": "firmwareVersion >= 3.2",
			"label": "Power Reporting Interval",
			"description": "defines the time interval of sending at most 5 standard power reports",
			"valueSize": 2,
			"minValue": 5,
			"maxValue": 600,
			"defaultValue": 30
		},
		{
			"#": "13",
			"$if": "firmwareVersion >= 3.2",
			"label": "Energy Reporting Threshold",
			"description": "specifies the minimum change in energy consumption",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 500,
			"defaultValue": 10,
			"options": [
				{
					"label": "Energy reports inactive",
					"value": 0
				}
			]
		},
		{
			"#": "14",
			"$if": "firmwareVersion >= 3.2",
			"label": "Power and Energy Periodic Reports",
			"description": "defines time period between independent reports sent",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 3600,
			"options": [
				{
					"label": "Periodic reports inactive",
					"value": 0
				}
			]
		},
		{
			"#": "15",
			"$if": "firmwareVersion >= 3.2",
			"label": "Measuring Energy Consumed by the Wall Plug Itself",
			"description": "determines whether power metering should include the amount of power",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Function inactive",
					"value": 0
				},
				{
					"label": "Function activated",
					"value": 1
				}
			]
		},
		{
			"#": "16",
			"$if": "firmwareVersion <= 3.1",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev"
		},
		{
			"#": "20",
			"$if": "firmwareVersion >= 3.2",
			"label": "On/Off (Button)” Association Group (2)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Control as the wall plug",
					"value": 0
				},
				{
					"label": "Control opposite to the wall plug",
					"value": 1
				}
			]
		},
		{
			"#": "21",
			"$if": "firmwareVersion >= 3.2",
			"label": "DOWN Value - Association Group (3)",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 24900,
			"defaultValue": 300
		},
		{
			"#": "22",
			"$if": "firmwareVersion >= 3.2",
			"label": "UP Value - Association Group (3)",
			"valueSize": 2,
			"minValue": 100,
			"maxValue": 25000,
			"defaultValue": 500
		},
		{
			"#": "23",
			"$if": "firmwareVersion >= 3.2",
			"label": "Response After Exceeding Defined Power Values",
			"description": "defines the way that 3rd association group devices are controlled.",
			"valueSize": 1,
			"defaultValue": 6,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Turn the associated devices on (Down)",
					"value": 1
				},
				{
					"label": "Turn the associated devices off (Down)",
					"value": 2
				},
				{
					"label": "Turn the associated devices on (Up)",
					"value": 3
				},
				{
					"label": "Turn the associated devices off (Up)",
					"value": 4
				},
				{
					"label": "Combination of 1 and 4",
					"value": 5
				},
				{
					"label": "Combination of 2 and 3",
					"value": 6
				}
			]
		},
		{
			"#": "24",
			"$if": "firmwareVersion >= 3.2",
			"label": "SWITCH ON Value - „On/Off” Association Groups",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 255,
			"options": [
				{
					"label": "Default",
					"value": 255
				}
			]
		},
		{
			"#": "30",
			"$if": "firmwareVersion >= 3.2",
			"label": "Active Alarms",
			"description": "Define Z-Wave network alarms to which the Wall Plug will respond",
			"valueSize": 1,
			"defaultValue": 63,
			"allowManualEntry": false,
			"options": [
				{
					"label": "General alarm",
					"value": 1
				},
				{
					"label": "Smoke alarm",
					"value": 2
				},
				{
					"label": "CO alarm",
					"value": 4
				},
				{
					"label": "CO2 alarm",
					"value": 8
				},
				{
					"label": "High temperature alarm",
					"value": 16
				},
				{
					"label": "Flood alarm",
					"value": 32
				},
				{
					"label": "All",
					"value": 63
				}
			]
		},
		{
			"#": "31",
			"$if": "firmwareVersion >= 3.2",
			"label": "Response to Alarm Frames",
			"description": "defines how the Wall Plug will respond to alarms",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 0
		},
		{
			"#": "32",
			"$if": "firmwareVersion >= 3.2",
			"label": "Alarm State Duration",
			"description": "specifies the duration of alarm state",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 32400,
			"defaultValue": 600
		},
		{
			"#": "34",
			"$if": "firmwareVersion <= 3.1",
			"label": "Reaction to Alarms",
			"description": "Alarms to which the Wall Plug will respond",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 63,
			"defaultValue": 63
		},
		{
			"#": "35",
			"$if": "firmwareVersion <= 3.1",
			"label": "Response to Alarms",
			"description": "Defines responds to alarms (device's status change).",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No reaction",
					"value": 0
				},
				{
					"label": "Turn on",
					"value": 1
				},
				{
					"label": "Turn off",
					"value": 2
				},
				{
					"label": "Cycle on/off",
					"value": 3
				}
			]
		},
		{
			"#": "39",
			"$if": "firmwareVersion <= 3.1",
			"label": "Alarm Duration",
			"description": "Wall Plug's alarm mode duration.",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 65535,
			"defaultValue": 600,
			"unsigned": true
		},
		{
			"#": "40",
			"$if": "firmwareVersion <= 3.1",
			"label": "Immediate Power Report",
			"description": "Defines how much power load must change to be reported.",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 80
		},
		{
			"#": "40",
			"$if": "firmwareVersion >= 3.2",
			"label": "Power Load for Violet Colour",
			"description": "determines maximum active power value",
			"valueSize": 2,
			"minValue": 1000,
			"maxValue": 30000,
			"defaultValue": 25000
		},
		{
			"#": "41",
			"$if": "firmwareVersion >= 3.2",
			"label": "LED Ring Colour (Device Is ON)",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Illumination turned off completely",
					"value": 0
				},
				{
					"label": "Colour changes depending on active power",
					"value": 1
				},
				{
					"label": "Colour changes in steps depending on active power",
					"value": 2
				},
				{
					"label": "White",
					"value": 3
				},
				{
					"label": "Red",
					"value": 4
				},
				{
					"label": "Green",
					"value": 5
				},
				{
					"label": "Blue",
					"value": 6
				},
				{
					"label": "Yellow",
					"value": 7
				},
				{
					"label": "Cyan",
					"value": 8
				},
				{
					"label": "Magenta",
					"value": 9
				}
			]
		},
		{
			"#": "42",
			"$if": "firmwareVersion <= 3.1",
			"label": "Standard Power Load Report",
			"description": "Defines how much power load must change to be reported",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 15
		},
		{
			"#": "42",
			"$if": "firmwareVersion >= 3.2",
			"label": "LED Ring Colour (Device Is OFF)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Illumination turned off completely",
					"value": 0
				},
				{
					"label": "LED ring is illuminated",
					"value": 1
				},
				{
					"label": "White",
					"value": 3
				},
				{
					"label": "Red",
					"value": 4
				},
				{
					"label": "Green",
					"value": 5
				},
				{
					"label": "Blue",
					"value": 6
				},
				{
					"label": "Yellow",
					"value": 7
				},
				{
					"label": "Cyan",
					"value": 8
				},
				{
					"label": "Magenta",
					"value": 9
				}
			]
		},
		{
			"#": "43",
			"$if": "firmwareVersion <= 3.1",
			"label": "Power Reporting Frequency",
			"description": "Frequence of standard power reports",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 30,
			"unsigned": true
		},
		{
			"#": "43",
			"$if": "firmwareVersion >= 3.2",
			"label": "LED Ring Colour (Alarm Detection)",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Illumination turned off completely",
					"value": 0
				},
				{
					"label": "No change in colour",
					"value": 1
				},
				{
					"label": "LED ring flashes red/blue/white",
					"value": 2
				},
				{
					"label": "White",
					"value": 3
				},
				{
					"label": "Red",
					"value": 4
				},
				{
					"label": "Green",
					"value": 5
				},
				{
					"label": "Blue",
					"value": 6
				},
				{
					"label": "Yellow",
					"value": 7
				},
				{
					"label": "Cyan",
					"value": 8
				},
				{
					"label": "Magenta",
					"value": 9
				}
			]
		},
		{
			"#": "45",
			"$if": "firmwareVersion <= 3.1",
			"label": "Reporting Changes in Energy Consumed",
			"description": "Required change in power to generate power report.",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 1,
			"unsigned": true
		},
		{
			"#": "47",
			"$if": "firmwareVersion <= 3.1",
			"label": "Maximum Time Period Between Reports",
			"description": "Time between reports in power load not been recorded.",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 65534,
			"defaultValue": 3600,
			"unsigned": true
		},
		{
			"#": "49",
			"$if": "firmwareVersion <= 3.1",
			"label": "Metering Energy Consumed by the Wall Plug Itself",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Inactive",
					"value": 0
				},
				{
					"label": "Activated",
					"value": 1
				}
			]
		},
		{
			"#": "50",
			"$if": "firmwareVersion <= 3.1",
			"label": "DOWN Value",
			"description": "Lower power threshold, used in parameter 52.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 300,
			"unsigned": true
		},
		{
			"#": "50",
			"$if": "firmwareVersion >= 3.2",
			"label": "Associations in Z-Wave Network Security Mode",
			"description": "defines how commands are sent in specified association groups",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "None of the groups sent as secure",
					"value": 0
				},
				{
					"label": "2nd group sent as secure",
					"value": 1
				},
				{
					"label": "3rd group sent as secure",
					"value": 2
				},
				{
					"label": "2nd and 3rd group sent as secure",
					"value": 3
				}
			]
		},
		{
			"#": "51",
			"$if": "firmwareVersion <= 3.1",
			"label": "UP Value",
			"description": "Upper power threshold, used in parameter 52.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 500,
			"unsigned": true
		},
		{
			"#": "52",
			"$if": "firmwareVersion <= 3.1",
			"label": "Action in Case Defined Power Values Exceeded",
			"description": "Defines the way 2nd association group devices are controlled",
			"valueSize": 1,
			"defaultValue": 6,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Function inactive",
					"value": 0
				},
				{
					"label": "Turn devices on when power below down",
					"value": 1
				},
				{
					"label": "Turn devices off when power below down",
					"value": 2
				},
				{
					"label": "Turn devices on when power above up",
					"value": 3
				},
				{
					"label": "Turn devices off when power above up",
					"value": 4
				},
				{
					"label": "Turn on power below down, off power above up",
					"value": 5
				},
				{
					"label": "Turn off power below down, on when power above up",
					"value": 6
				}
			]
		},
		{
			"#": "60",
			"$if": "firmwareVersion <= 3.1",
			"label": "Power Load to Make Red Ring Flash Violet",
			"description": "Red ring flashes violet when parameter 61 is set to 0 or 1.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 25000,
			"unsigned": true
		},
		{
			"#": "61",
			"$if": "firmwareVersion <= 3.1",
			"label": "LED Color When Device Is On",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED will use predefined steps depending on power",
					"value": 0
				},
				{
					"label": "LED will use continuous color depending on power",
					"value": 1
				},
				{
					"label": "White illumination",
					"value": 2
				},
				{
					"label": "Red illumination",
					"value": 3
				},
				{
					"label": "Green illumination",
					"value": 4
				},
				{
					"label": "Blue illumination",
					"value": 5
				},
				{
					"label": "Yellow illumination",
					"value": 6
				},
				{
					"label": "Cyan illumination",
					"value": 7
				},
				{
					"label": "Magenta illumination",
					"value": 8
				},
				{
					"label": "NO illumination",
					"value": 9
				}
			]
		},
		{
			"#": "62",
			"$if": "firmwareVersion <= 3.1",
			"label": "LED Color When Device Is Off",
			"valueSize": 1,
			"defaultValue": 8,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED steps depending on the last power when on",
					"value": 0
				},
				{
					"label": "White illumination",
					"value": 1
				},
				{
					"label": "Red illumination",
					"value": 2
				},
				{
					"label": "Green illumination",
					"value": 3
				},
				{
					"label": "Blue illumination",
					"value": 4
				},
				{
					"label": "Yellow illumination",
					"value": 5
				},
				{
					"label": "Cyan illumination",
					"value": 6
				},
				{
					"label": "Magenta illumination",
					"value": 7
				},
				{
					"label": "NO illumination",
					"value": 8
				}
			]
		},
		{
			"#": "63",
			"$if": "firmwareVersion <= 3.1",
			"label": "LED Color When Z Wave Alarm",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No change in color",
					"value": 0
				},
				{
					"label": "LED flashes red blue white",
					"value": 1
				},
				{
					"label": "White illumination",
					"value": 2
				},
				{
					"label": "Red illumination",
					"value": 3
				},
				{
					"label": "Green illumination",
					"value": 4
				},
				{
					"label": "Blue illumination",
					"value": 5
				},
				{
					"label": "Yellow illumination",
					"value": 6
				},
				{
					"label": "Cyan illumination",
					"value": 7
				},
				{
					"label": "Magenta illumination",
					"value": 8
				},
				{
					"label": "NO illumination",
					"value": 9
				}
			]
		},
		{
			"#": "70",
			"$if": "firmwareVersion <= 3.1",
			"label": "Overload Safety Switch",
			"description": "Turns off controlled device in case of exceeding power.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 65535,
			"unsigned": true
		}
	]
}