{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGWPE/F-101",
	"description": "Metered Wall Plug Switch",
	"devices": [
		{
			"productType": "0x0600",
			"productId": "0x1000",
			"zwaveAllianceId": 993
		},
		{
			"productType": "0x0600",
			"productId": "0x4000"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Group 1 (on/off controlled devices)",
			"maxNodes": 10
		},
		"2": {
			"label": "Group 2 (measured load controlled devices)",
			"maxNodes": 10
		},
		"3": {
			"label": "Controller Updates",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Always On Function",
			"description": "Once activated, Wall Plug will keep a connected device ...",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Activated",
					"value": 0
				},
				{
					"label": "Inactive",
					"value": 1
				}
			]
		},
		{
			"#": "16",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev"
		},
		{
			"#": "34",
			"label": "Reaction to Alarms",
			"description": "Define Z-Wave network alarms to which the Wall Plug will respond.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 63,
			"defaultValue": 63
		},
		{
			"#": "35",
			"label": "Response to Alarms",
			"description": "Parameter defines how the Wall Plug will respond to alarms ...",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No reaction",
					"value": 0
				},
				{
					"label": "Turn on",
					"value": 1
				},
				{
					"label": "Turn off",
					"value": 2
				},
				{
					"label": "Cycle on/off",
					"value": 3
				}
			]
		},
		{
			"#": "39",
			"label": "Alarm Duration",
			"description": "Wall Plug's alarm mode duration. If a device sending an ...",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 65535,
			"defaultValue": 600,
			"unsigned": true
		},
		{
			"#": "40",
			"label": "Immediate Power Report",
			"description": "Parameter defines by how much power load must change ...",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 80
		},
		{
			"#": "42",
			"label": "Standard Power Load Report",
			"description": "Parameter defines by how much power load must change ..",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 15
		},
		{
			"#": "43",
			"label": "Power Reporting Frequency",
			"description": "This parameter defines how frequently standard power ...",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 30,
			"unsigned": true
		},
		{
			"#": "45",
			"label": "Changes in Energy Consumed by Controlled Devices",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 1,
			"unsigned": true
		},
		{
			"#": "47",
			"label": "Time Between Reports On Power/energy Consumption",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 65534,
			"defaultValue": 3600,
			"unsigned": true
		},
		{
			"#": "49",
			"label": "Metering Energy Consumed by the Wall Plug Itself",
			"description": "This parameter determines whether energy metering ...",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Inactive",
					"value": 0
				},
				{
					"label": "Activated",
					"value": 1
				}
			]
		},
		{
			"#": "50",
			"label": "DOWN Value",
			"description": "Lower power threshold, used in parameter 52.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 300,
			"unsigned": true
		},
		{
			"#": "51",
			"label": "UP Value",
			"description": "Upper power threshold, used in parameter 52.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 500,
			"unsigned": true
		},
		{
			"#": "52",
			"label": "Action in Case Defined Power Values Exceeded",
			"description": "Parameter defines the way 2nd association group devices ...",
			"valueSize": 1,
			"defaultValue": 6,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Function inactive",
					"value": 0
				},
				{
					"label": "Turn devices on when power below down",
					"value": 1
				},
				{
					"label": "Turn devices off when power below down",
					"value": 2
				},
				{
					"label": "Turn devices on when power above up",
					"value": 3
				},
				{
					"label": "Turn devices off when power above up",
					"value": 4
				},
				{
					"label": "Turn devices on when power below down and off",
					"value": 5
				},
				{
					"label": "Turn devices off when power below down",
					"value": 6
				}
			]
		},
		{
			"#": "60",
			"label": "Power Load to Make Red Ring Flash Violet",
			"description": "Function is active only when parameter 61 is set to 0 or 1.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 25000,
			"unsigned": true
		},
		{
			"#": "61",
			"label": "LED Color When Device Is On",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED will use predefined steps depending on power",
					"value": 0
				},
				{
					"label": "LED will use continuous color depending on power",
					"value": 1
				},
				{
					"label": "White illumination",
					"value": 2
				},
				{
					"label": "Red illumination",
					"value": 3
				},
				{
					"label": "Green illumination",
					"value": 4
				},
				{
					"label": "Blue illumination",
					"value": 5
				},
				{
					"label": "Yellow illumination",
					"value": 6
				},
				{
					"label": "Cyan illumination",
					"value": 7
				},
				{
					"label": "Magenta illumination",
					"value": 8
				},
				{
					"label": "NO illumination",
					"value": 9
				}
			]
		},
		{
			"#": "62",
			"label": "LED Color When Device Is Off",
			"valueSize": 1,
			"defaultValue": 8,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED ring illuminated with color before turned off",
					"value": 0
				},
				{
					"label": "White illumination",
					"value": 1
				},
				{
					"label": "Red illumination",
					"value": 2
				},
				{
					"label": "Green illumination",
					"value": 3
				},
				{
					"label": "Blue illumination",
					"value": 4
				},
				{
					"label": "Yellow illumination",
					"value": 5
				},
				{
					"label": "Cyan illumination",
					"value": 6
				},
				{
					"label": "Magenta illumination",
					"value": 7
				},
				{
					"label": "NO illumination",
					"value": 8
				}
			]
		},
		{
			"#": "63",
			"label": "LED Color When Z Wave Alarm",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No change in color",
					"value": 0
				},
				{
					"label": "LED flashes red blue white",
					"value": 1
				},
				{
					"label": "White illumination",
					"value": 2
				},
				{
					"label": "Red illumination",
					"value": 3
				},
				{
					"label": "Green illumination",
					"value": 4
				},
				{
					"label": "Blue illumination",
					"value": 5
				},
				{
					"label": "Yellow illumination",
					"value": 6
				},
				{
					"label": "Cyan illumination",
					"value": 7
				},
				{
					"label": "Magenta illumination",
					"value": 8
				},
				{
					"label": "NO illumination",
					"value": 9
				}
			]
		},
		{
			"#": "70",
			"label": "Overload Safety Switch",
			"description": "This function allows for turning off the controlled device...",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 65535,
			"unsigned": true
		}
	]
}