{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGR222",
	"description": "Roller Shutter 2",
	"devices": [
		{
			"productType": "0x0300",
			"productId": "0x0102",
			"zwaveAllianceId": 38
		},
		{
			"productType": "0x0301",
			"productId": "0x1001"
		},
		{
			"productType": "0x0302",
			"productId": "0x1000"
		},
		{
			"productType": "0x0302",
			"productId": "0x3000"
		},
		{
			"productType": "0x0302",
			"productId": "0x4000"
		}
	],
	"firmwareVersion": {
		"min": "24.24",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Momentary click",
			"maxNodes": 16
		},
		"2": {
			"label": "Momentary hold",
			"maxNodes": 16
		},
		"3": {
			"label": "Controller Updates",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"proprietary": {
		"fibaroCCs": [38 /* 0x26 (Venetian Blinds) */]
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "Reports Type",
			"description": "value should be set to 1 if the module operates in Venetian Blind mode.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Blind position using Z-Wave command",
					"value": 0
				},
				{
					"label": "Blind position via Fibaro command",
					"value": 1
				}
			]
		},
		{
			"#": "10",
			"label": "Roller Shutter Operating Modes",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Roller blind mode, without positioning",
					"value": 0
				},
				{
					"label": "Roller blind mode, with positioning",
					"value": 1
				},
				{
					"label": "Venetian blind mode, with positioning",
					"value": 2
				},
				{
					"label": "Gate mode, without positioning",
					"value": 3
				},
				{
					"label": "Gate mode, with positioning",
					"value": 4
				}
			]
		},
		{
			"#": "12",
			"label": "Turning Time/ Delay Time",
			"description": "depending on mode, turning time or delay time",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 150,
			"unsigned": true
		},
		{
			"#": "13",
			"label": "Lamellas Positioning Mode",
			"description": "Parameter influences the lamellas positioning in venetian blind mode",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Only in case of the main controller operation",
					"value": 0
				},
				{
					"label": "Default - Controller+switchlimit",
					"value": 1
				},
				{
					"label": "Like 1 + stop control frame",
					"value": 2
				}
			]
		},
		{
			"#": "14",
			"label": "Switch Type",
			"description": "either Toggle switches or a single, momentary switch.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Momentary switches",
					"value": 0
				},
				{
					"label": "Toggle switches",
					"value": 1
				},
				{
					"label": "Single, momentary switch",
					"value": 2
				}
			]
		},
		{
			"#": "17",
			"label": "Delay Time After S2",
			"description": "delay till auto turned off or auto gate close",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "18",
			"label": "Motor Operation Detection",
			"description": "Power threshold to be interpreted as reaching a limit switch.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "22",
			"label": "Motor Operation Time",
			"description": "Time period for the motor to continue operation.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "29",
			"label": "Forced Roller Shutter Calibration",
			"description": "set to 1 will enter calibration mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Deactivated",
					"value": 0
				},
				{
					"label": "Start calibration process",
					"value": 1
				}
			]
		},
		{
			"#": "30",
			"label": "Response to General Alarm",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "31",
			"label": "Response to Water Flood Alarm",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "32",
			"label": "Response to Smoke, CO, CO2 Alarm",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "33",
			"label": "Response to Temperature Alarm",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "35",
			"label": "Managing Lamellas in Response to Alarm",
			"description": "0 no change, 1 extreme position",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Do not change lamellas position",
					"value": 0
				},
				{
					"label": "Set lamellas to their extreme position",
					"value": 1
				}
			]
		},
		{
			"#": "40",
			"label": "Power Reports",
			"description": "change that needs to occur to trigger the power report",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 10
		},
		{
			"#": "42",
			"label": "Periodic Power or Energy Reports",
			"description": "Time to the next report. Value of 0 means the reports are turned off.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65534,
			"defaultValue": 3600,
			"unsigned": true
		},
		{
			"#": "43",
			"label": "Energy Reports",
			"description": "Energy threshold to trigger report",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 254,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "44",
			"label": "Self-Measurement",
			"description": "if power and energy reports are to sent to the main controller",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Activated",
					"value": 1
				}
			]
		},
		{
			"#": "50",
			"label": "Scenes/ Associations Activation",
			"description": "whether scenes or associations are activated by the switch keys",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Associations active",
					"value": 0
				},
				{
					"label": "Scenes active",
					"value": 1
				}
			]
		}
	]
}