{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGK101",
	"description": "Door Opening Sensor",
	"devices": [
		{
			"productType": "0x0700",
			"productId": "0x1000"
		},
		{
			"productType": "0x0701",
			"productId": "0x1001"
		},
		{
			"productType": "0x0700",
			"productId": "0x2000",
			"zwaveAllianceId": 1077
		},
		{
			"productType": "0x0701",
			"productId": "0x2001"
		},
		{
			"productType": "0x0700",
			"productId": "0x3000"
		},
		{
			"productType": "0x0701",
			"productId": "0x3001"
		},
		{
			"productType": "0x0700",
			"productId": "0x4000"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Input IN1",
			"maxNodes": 5
		},
		"2": {
			"label": "TMP Button",
			"maxNodes": 5
		},
		"3": {
			"label": "Condition",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"$if": "firmwareVersion <= 3.1",
			"label": "IN1 Alarm Cancellation Delay",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 0,
			"unsigned": true
		},
		{
			"#": "1",
			"$if": "firmwareVersion >= 3.2",
			"label": "Operations Mode",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 1,
			"defaultValue": 0,
			"options": [
				{
					"label": "Door sensor or external alarm sensor",
					"value": 0
				},
				{
					"label": "External button",
					"value": 1
				}
			]
		},
		{
			"#": "2",
			"$if": "firmwareVersion <= 3.1",
			"label": "Status Change Signalled by LED",
			"valueSize": 1,
			"defaultValue": 1,
			"unsigned": true,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED turned off",
					"value": 0
				},
				{
					"label": "LED turned on",
					"value": 1
				},
				{
					"label": "No DS18B20 temperature sensor",
					"value": 255
				}
			]
		},
		{
			"#": "2",
			"$if": "firmwareVersion >= 3.2",
			"label": "Door State When Magnet Is Close",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 1,
			"defaultValue": 0,
			"options": [
				{
					"label": "Closed",
					"value": 0
				},
				{
					"label": "Open",
					"value": 1
				}
			]
		},
		{
			"#": "3",
			"$if": "firmwareVersion <= 2.4",
			"label": "Input 1 Type",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Normally open",
					"value": 0
				},
				{
					"label": "Normally closed",
					"value": 1
				},
				{
					"label": "Monostable",
					"value": 2
				},
				{
					"label": "Bistable",
					"value": 3
				}
			]
		},
		{
			"#": "3[0x01]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "LED Indicator Purpose: Open/Close Status",
			"valueSize": 1,
			"defaultValue": 0
		},
		{
			"#": "3[0x02]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "LED Indicator Purpose: Wake Up",
			"valueSize": 1,
			"defaultValue": 1
		},
		{
			"#": "3[0x04]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "LED Indicator Purpose: Device Tampering",
			"valueSize": 1,
			"defaultValue": 1
		},
		{
			"#": "4",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Range Test After Double Click"
		},
		{
			"#": "5",
			"$if": "firmwareVersion <= 3.1",
			"label": "Type of Alarm Frame for Group 1",
			"valueSize": 1,
			"defaultValue": 255,
			"unsigned": true,
			"allowManualEntry": false,
			"options": [
				{
					"label": "General purpose alarm (Door/Window)",
					"value": 0
				},
				{
					"label": "Smoke alarm",
					"value": 1
				},
				{
					"label": "CO alarm",
					"value": 2
				},
				{
					"label": "CO2 alarm",
					"value": 3
				},
				{
					"label": "Heat alarm",
					"value": 4
				},
				{
					"label": "Flood alarm",
					"value": 5
				},
				{
					"label": "Basic Set",
					"value": 255
				}
			]
		},
		{
			"#": "7",
			"$if": "firmwareVersion <= 3.1",
			"label": "Forced Level of Dimming Group 1",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 255,
			"defaultValue": 255,
			"unsigned": true
		},
		{
			"#": "9",
			"$if": "firmwareVersion <= 3.1",
			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
			"label": "Disabling of Alarms for Group 1",
			"defaultValue": 0
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 2.5 && firmwareVersion <= 3.1",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Tamper Alarm",
			"defaultValue": 1
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 3.2",
			"label": "2nd Association Group Triggers",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 2,
			"defaultValue": 0,
			"options": [
				{
					"label": "After opening and closing",
					"value": 0
				},
				{
					"label": "After opening",
					"value": 1
				},
				{
					"label": "After closing",
					"value": 2
				}
			]
		},
		{
			"#": "11",
			"$if": "firmwareVersion >= 3.2",
			"label": "Commands Sent to 2nd Association Group",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 2,
			"defaultValue": 2,
			"options": [
				{
					"label": "On",
					"value": 0
				},
				{
					"label": "Off",
					"value": 1
				},
				{
					"label": "On & off",
					"value": 2
				}
			]
		},
		{
			"#": "12",
			"$if": "firmwareVersion <= 3.1",
			"label": "Temperature Change Threshold",
			"description": "Parameter / 16 = Celsius value.  Parameter / 80/9 = Fahrenheit value.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 8,
			"unsigned": true
		},
		{
			"#": "12",
			"$if": "firmwareVersion >= 3.2",
			"label": "Value of ON Command Sent to 2nd Association Group",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 255
		},
		{
			"#": "13",
			"$if": "firmwareVersion <= 3.1",
			"label": "Send Alarm or Basic Set in Broadcast Mode",
			"description": "Parameter 5 controls type of message.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 3,
			"defaultValue": 0,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "Input is broadcast",
					"value": 1
				},
				{
					"label": "Tamper is broadcast",
					"value": 2
				},
				{
					"label": "Input and tamper both broadcast",
					"value": 3
				}
			]
		},
		{
			"#": "13",
			"$if": "firmwareVersion >= 3.2",
			"label": "Value of OFF Sent to 2nd Association Group",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0
		},
		{
			"#": "14",
			"$if": "firmwareVersion <= 3.1",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene Functionality"
		},
		{
			"#": "14",
			"$if": "firmwareVersion >= 3.2",
			"label": "Time Delay of ON Command Frame",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "15",
			"$if": "firmwareVersion >= 2.5 && firmwareVersion <= 3.1",
			"label": "DS18B20 Sensor Status",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 0,
			"unsigned": true,
			"readOnly": true,
			"options": [
				{
					"label": "Working",
					"value": 0
				},
				{
					"label": "Not working",
					"value": 1
				},
				{
					"label": "No sensor",
					"value": 255
				}
			]
		},
		{
			"#": "15",
			"$if": "firmwareVersion >= 3.2",
			"label": "Off Command Delay",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "20",
			"$if": "firmwareVersion >= 3.2",
			"label": "Type of Alarm Frame",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 5,
			"defaultValue": 0,
			"options": [
				{
					"label": "General purpose alarm (Door/Window)",
					"value": 0
				},
				{
					"label": "Smoke alarm",
					"value": 1
				},
				{
					"label": "CO alarm",
					"value": 2
				},
				{
					"label": "CO2 alarm",
					"value": 3
				},
				{
					"label": "Heat alarm",
					"value": 4
				},
				{
					"label": "Flood alarm",
					"value": 5
				}
			]
		},
		{
			"#": "30",
			"$if": "firmwareVersion >= 3.2",
			"label": "Tamper Alarm Duration",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 5
		},
		{
			"#": "31",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Tamper Cancellation Reports",
			"defaultValue": 1
		},
		{
			"#": "50",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Measurement Interval",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 300
		},
		{
			"#": "51",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Reports Threshold",
			"valueSize": 2,
			"unit": "0.1 °C",
			"minValue": 0,
			"maxValue": 300,
			"defaultValue": 10
		},
		{
			"#": "52",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Reports Interval",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32400,
			"defaultValue": 0
		},
		{
			"#": "53",
			"$if": "firmwareVersion >= 3.2",
			"label": "Temperature Calibration",
			"valueSize": 4,
			"unit": "0.1 °C",
			"minValue": -1000,
			"maxValue": 1000,
			"defaultValue": 0
		},
		{
			"#": "54[0x01]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "High Temperature Alarm",
			"valueSize": 1
		},
		{
			"#": "54[0x02]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Low Temperature Alarm",
			"valueSize": 1
		},
		{
			"#": "55",
			"$if": "firmwareVersion >= 3.2",
			"label": "High Temperature Alarm Threshold",
			"valueSize": 2,
			"unit": "0.1 °C",
			"minValue": 0,
			"maxValue": 1000,
			"defaultValue": 540
		},
		{
			"#": "56",
			"$if": "firmwareVersion >= 3.2",
			"label": "Low Temperature Alarm Threshold",
			"valueSize": 2,
			"unit": "0.1 °C",
			"minValue": -300,
			"maxValue": 700,
			"defaultValue": 40
		},
		{
			"#": "70[0x01]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Opening Door",
			"valueSize": 2
		},
		{
			"#": "70[0x02]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Closing Door",
			"valueSize": 2
		},
		{
			"#": "70[0x04]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Holding",
			"description": "Only available if Operations Mode (parameter 1) is set to external button",
			"valueSize": 2
		},
		{
			"#": "70[0x08]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Releasing",
			"description": "Only available if Operations Mode (parameter 1) is set to external button",
			"valueSize": 2
		},
		{
			"#": "70[0x10]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Double Click",
			"description": "Only available if Operations Mode (parameter 1) is set to external button",
			"valueSize": 2
		},
		{
			"#": "70[0x20]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Triple Click",
			"description": "Only available if Operations Mode (parameter 1) is set to external button",
			"valueSize": 2
		},
		{
			"#": "70[0x0100]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: High Temperature - Door Open",
			"valueSize": 2
		},
		{
			"#": "70[0x0200]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: High Temperature - Door Closed",
			"valueSize": 2
		},
		{
			"#": "70[0x0400]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Low Temperature - Door Open",
			"valueSize": 2
		},
		{
			"#": "70[0x0800]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Scene: Low Temperature - Door Closed",
			"valueSize": 2
		},
		{
			"#": "71[0x01]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Broadcast On/Off Commands",
			"valueSize": 1
		},
		{
			"#": "71[0x02]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Broadcast Sensor Alarm",
			"valueSize": 1
		},
		{
			"#": "71[0x04]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Broadcast Tamper Alarm",
			"valueSize": 1
		},
		{
			"#": "72[0x01]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "templates/fibaro_template.json#send_secure_commands_group2",
			"defaultValue": 1
		},
		{
			"#": "72[0x02]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "templates/fibaro_template.json#send_secure_commands_group3",
			"defaultValue": 1
		},
		{
			"#": "72[0x04]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "templates/fibaro_template.json#send_secure_commands_group4",
			"defaultValue": 1
		},
		{
			"#": "72[0x08]",
			"$if": "firmwareVersion >= 3.2",
			"$import": "templates/fibaro_template.json#send_secure_commands_group5",
			"defaultValue": 1
		}
	],
	"compat": [
		{
			"$if": "firmwareVersion < 3.2",
			// On older firmware versions, the device has a Multilevel sensor on endpoint 2
			// which is not mirrored on the root endpoint. However, the endpoints are considered
			// unnecessary, so endpoint 2 gets hidden along with the sensor.
			"preserveEndpoints": [2],
			"preserveRootApplicationCCValueIDs": true,

			// The device is a Binary Sensor, but uses Basic Sets to report its status
			"mapBasicSet": "auto"
		},
		{
			// The device is a Binary Sensor, but uses Basic Sets to report its status
			"mapBasicSet": "auto"
		}
	]
}